IXARC Absolute Rotary Encoder
OCD-PPA1G-0412-C06S-PRT
POSITAL
Measuring Tools & Sensors
Parallel - Gray, Multiturn - 4 bit (16 rev), 12 bit (4096 Steps; 0.088°), IP67, Aluminum / Steel, Solid Shaft - Clamping, ø 58 mm (2.28"), ø 6 mm (0.24"), Connector - Radial M27, ≤ 0.02° (Optical), CE / UL
Available
0
| Interface | |
| Interface | Bit Parallel |
| Manual Functions | Counting direction via cable or connector |
| Outputs | |
| Output Driver | Push-Pull |
| Electrical Data | |
| Supply Voltage | 10 – 30 VDC |
| Current Consumption | ≤ 400 mA @ 10 V DC, ≤ 180 mA @ 24 V DC |
| Power Consumption | ≤ 1.5 W |
| Start-Up Time | < 1 s |
| Settling Time | 80 ms |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| EMC: Emitted Interference | DIN EN 61000-6-4 |
| EMC: Noise Immunity | DIN EN 61000-6-2 |
| MTTF | 15.9 years @ 40 °C |
| Sensor | |
| Technology | Optical |
| Resolution Singleturn | 12 bit |
| Resolution Multiturn | 4 bit |
| Multiturn Technology | Mechanical Gearing (no Battery) |
| Accuracy (INL) | ±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit) |
| Code | Gray |
| Environmental Specifications | |
| Protection Class (Shaft) | IP66/IP67 |
| Protection Class (Housing) | IP65 |
| Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
| Humidity | 98% RH, no condensation |
| Mechanical Data | |
| Housing Material | Brass |
| Housing Coating | Powder Coated + Cathodic corrosion protection (>720 h salt spay resistance) |
| Flange Type | Clamp, ø 58 mm (C) |
| Flange Material | Aluminum |
| Shaft Type | Solid, Length = 10 mm |
| Shaft Diameter | ø 6 mm (0.24") |
| Shaft Material | Stainless Steel V2A (1.4305, 303) |
| Max. Shaft Load | Axial 40 N, Radial 110 N |
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr) | 530 (20 N / 40 N), 185 (40 N / 60 N), 130 (40 N / 80 N), 80 (40 N / 110 N) |
| Rotor Inertia | ≤ 30 gcm² [≤ 0.17 oz-in²] |
| Friction Torque | ≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F) |
| Max. Permissible Mechanical Speed | ≤ 3000 1/min |
| Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
| Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) |
| Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) |
| Length | 78,5 mm (3.09") |
| Weight | 315 g (0.69 lb) |
| Electrical Connection | |
| Connection Orientation | Radial |
| Connector | M27, Male, 26 pin |
| Certification | |
| Approval | CE + cULus |
| Product Life Cycle | |
| Product Life Cycle | Established |
 |
| Connection Plan | |
| SIGNAL | PIN NUMBER |
| Bit 1 | 1 |
| Bit 2 | 2 |
| Bit 3 | 3 |
| Bit 4 | 4 |
| Bit 5 | 5 |
| Bit 6 | 6 |
| Bit 7 | 7 |
| Bit 8 | 8 |
| Bit 9 | 9 |
| Bit 10 | 10 |
| Bit 11 | 11 |
| Bit 12 | 12 |
| Bit 13 | 13 |
| Bit 14 | 14 |
| Bit 15 | 15 |
| Bit 16 | 16 |
| Latch | 23 |
| DIR | 24 |
| Power Supply | 25 |
| GND | 26 |
Connector-View on Encoder
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
