IXARC Absolute Rotary Encoder
UCE-AC005-0013-F100-CAW
POSITAL
Measuring Tools & Sensors
Analog - Current 4-20mA, Singleturn, 13 bit (8192 Steps; 0.044°), IP64 / IP65, Aluminum / Steel, Solid Shaft - Clamping, ø 78 mm (3.07"), ø 10 mm (0.39"), Cable - Axial 1 m, ≤ 0.09° (Magnetic - Hall Effect), ATEX - Zone 1 & 21 (Oil+Gas)
Available
0
| Electrical Data | |
| Supply Voltage | 8 – 32 VDC |
| Current Consumption | Typical 20 mA @24 V (no load) |
| Start-Up Time | <500 ms |
| Max Load Resistance | 500 Ω |
| Analog Accuracy | @ 20 mA = ±20 µA (with an ideal power supply) |
| Linearity | 0.15% |
| Settling Time | 32 ms (from min value to max value jump) |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| EMC: Emitted Interference | DIN EN 61000-6-4 |
| EMC: Noise Immunity | DIN EN 61000-6-2 |
| MTTF | 278.3 years @ 40 °C |
| Sensor | |
| Technology | Magnetic |
| Resolution Singleturn | 13 bit |
| Resolution Multiturn | 0 bit |
| Accuracy (INL) | ±0.0878° (≤ 12 bit) |
| Code | Analog Current 4 – 20 mA |
| Minimum Measurement Range | 0 – 11.25° |
| Resolution of Output | Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) |
| Multiturn Range | Singleturn |
| Environmental Specifications | |
| Protection Class (Shaft) | IP65 |
| Protection Class (Housing) | IP66/IP67 |
| Operating Temperature | -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +70 °C (+158 °F) |
| Humidity | 98% RH, no condensation |
| Mechanical Data | |
| Connection Cap Material | Aluminum |
| Housing Material | Aluminum |
| Housing Coating | Eloxide |
| Flange Type | Clamp, ø 78 mm, ATEX |
| Flange Material | Aluminum |
| Shaft Type | Solid, Single Flat, Length = 20 mm |
| Shaft Diameter | ø 10 mm (0.39") |
| Rotor Inertia | ≤ 35 gcm² [≤ 0.2 oz-in²] |
| Friction Torque | ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) |
| Max. Permissible Mechanical Speed | ≤ 3000 1/min |
| Shock Resistance | ≤ 100 g (half sine 11 ms, EN 60068-2-27) |
| Vibration Resistance | ≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6) |
| Length | 118 mm (4.65") |
| Weight | 1210 g (2.67 lb) |
| Electrical Connection | |
| Connection Orientation | Axial |
| Connection Type | Cable / Connector |
| Cable Length | 1 m [39"] |
| Material / Type | PVC |
| Minimum Bend Radius | 50 mm (2") fixed, 100 mm (4") flexing |
| Certification | |
| Approval | CE + ATEX Zone 1 & 21 (Oil+Gas) |
| Product Life Cycle | |
| Product Life Cycle | New |
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
Watch a simple installation video