IXARC Absolute Rotary Encoder
UCD-S101G-0016-DACD-PRQ
POSITAL
Measuring Tools & Sensors
SSI / SSI + Incremental - Gray, Singleturn, 16 bit (65536 Steps; 0.005°), IP68 / IP69K, Aluminum / Steel, Solid Shaft - Clamping, ø 58 mm (2.28"), ø 10 mm (0.39"), Connector - Radial M12, ≤ 0.09° (Magnetic - Hall Effect), CE / UL
Available
0
Interface | |
Interface | SSI with Preset |
Manual Functions | Preset + complement via cable or connector |
Interface Cycle Time | ≥ 25 µs |
Number of Preset Cycles | 5,100,000 |
SSI Format | SSSSSSSSSSSSSSSS00 |
Video Manual | Watch a simple installation video |
Outputs | |
Output Driver | RS422 |
Electrical Data | |
Supply Voltage | 4.5 – 30 VDC |
Current Consumption | Typical 50 mA |
Power Consumption | ≤ 1.0 W |
Start-Up Time | < 1 s |
Clock Input | RS 422, via Optocoupler |
Clock Frequency | 100 kHz – 2 MHz |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
MTTF | 500 years @ 40 °C |
Sensor | |
Technology | Magnetic |
Resolution Singleturn | 16 bit |
Accuracy (INL) | ±0.0878° (≤ 12 bit) |
Code | Gray |
Environmental Specifications | |
Protection Class (Shaft) | IP68/IP69K |
Protection Class (Housing) | IP68/IP69K |
Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
Humidity | 98% RH, no condensation |
Mechanical Data | |
Housing Material | Steel |
Housing Coating | Cathodic corrosion protection (>720 hrs salt spray resistance) |
Flange Type | Clamp, ø 58 mm Heavy Duty |
Flange Material | Aluminum |
Shaft Type | Solid, Single Flat, Length = 20 mm |
Shaft Diameter | ø 10 mm (0.39") |
Shaft Material | Stainless Steel V4A (1.4112, 440 B), hardened |
Max. Shaft Load | Axial 180 N, Radial 180 N |
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr) | 10 (180 N / 180 N), 15 (150 N,150 N), 30 (100 N / 100 N) |
Friction Torque | ≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F) |
Max. Permissible Mechanical Speed | ≤ 3000 1/min |
Shock Resistance | ≤ 200 g (half sine 11 ms, EN 60068-2-27) |
Permanent Shock Resistance | ≤ 30 g (half sine 16 ms, EN 60068-2-29) |
Vibration Resistance | ≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6) |
Length | 56 mm (2.20") |
Weight | 195 g (0.43 lb) |
Electrical Connection | |
Connection Orientation | Radial |
Connector | M12, Male, 8 pin, a coded |
Certification | |
Approval | CE + cULus |
Product Life Cycle | |
Product Life Cycle | Established |
|
Connection Plan | |
SIGNAL | CONNECTOR | PIN NUMBER |
Power Supply | Connector 1 | 2 |
GND | Connector 1 | 1 |
Data+ | Connector 1 | 5 |
Data- | Connector 1 | 6 |
Clock+ | Connector 1 | 3 |
Clock- | Connector 1 | 4 |
Preset | Connector 1 | 7 |
DIR | Connector 1 | 8 |
Shielding | Connector 1 | Connector Housing |
Connector-View on Encoder
Rotation Clockwise (seen on shaft)
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.