IXARC Absolute Rotary Encoder
UCD-AV101-00AR-M100-PRM
POSITAL
Measuring Tools & Sensors
Analog - Voltage 0-5V Preset + Dir, Singleturn, 180° Measurement Angle, IP64 / IP65, Aluminum / Steel, Solid Shaft - Clamping, ø 58 mm (2.28"), ø 10 mm (0.39"), Connector - Radial M12, ≤ 0.09° (Magnetic - Hall Effect), CE / UL
Available
0
![picture-mx-3-crx-mx-nnn.jpg](/media/posital_fsimg/picture-mx-3-crx-mx-nnn.jpg)
Interface | |
Interface | Analog Voltage |
Manual Functions | Preset + complement via cable or connector |
Electrical Data | |
Supply Voltage | 8 – 32 VDC |
Current Consumption | Typical 15 mA @24V (no load) |
Start-Up Time | <500 ms |
Min. Load Resistance | 5 kΩ |
Analog Accuracy | @ 10 V = ±10 mV (with an ideal power supply) |
Linearity | 0.15% |
Settling Time | 32 ms (from min value to max value jump) |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
MTTF | 300.9 years @ 40 °C |
Sensor | |
Technology | Magnetic |
Resolution Singleturn | 180° Measurement Angle |
Resolution Multiturn | 0 bit |
Accuracy (INL) | ±0.0878° (≤ 12 bit) |
Code | Analog Voltage 0 – 5 V |
Cycle Time Base Sensor | < 100 µs |
Minimum Measurement Range | 0 – 11.25° |
Resolution of Output | Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) |
Multiturn Range | Singleturn |
Environmental Specifications | |
Protection Class (Shaft) | IP65 |
Protection Class (Housing) | IP65 |
Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
Humidity | 98% RH, no condensation |
Mechanical Data | |
Housing Material | Steel |
Housing Coating | Cathodic corrosion protection (>720 hrs salt spray resistance) |
Flange Type | Clamp, ø 58 mm (M) |
Flange Material | Aluminum |
Shaft Type | Solid, Single Flat, Length = 20 mm |
Shaft Diameter | ø 10 mm (0.39") |
Shaft Material | Stainless Steel V2A (1.4305, 303) |
Max. Shaft Load | Axial 40 N, Radial 110 N |
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr) | 430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N) |
Rotor Inertia | ≤ 30 gcm² [≤ 0.17 oz-in²] |
Friction Torque | ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) |
Max. Permissible Mechanical Speed | ≤ 12000 1/min |
Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) |
Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) |
Length | 92 mm (3.62") |
Weight | 255 g (0.56 lb) |
Electrical Connection | |
Connection Orientation | Radial |
Connector | M12, Male, 5 pin, a coded |
Certification | |
Approval | CE + cULus |
Product Life Cycle | |
Product Life Cycle | Established |
![](/media/posital_fsimg/m12_male_5pin_acoded.jpg) |
Connection Plan | |
SIGNAL | CONNECTOR | PIN NUMBER |
Power Supply | Connector 1 | 2 |
GND | Connector 1 | 3 |
Analog Output | Connector 1 | 1 |
Set1/Direction | Connector 1 | 5 |
Set2/Zero Set | Connector 1 | 4 |
Connector-View on Encoder
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.