IXARC Absolute Rotary Encoder
UCD-AV002-0013-KCBD-PAM
POSITAL
Measuring Tools & Sensors
Analog - Voltage 0-10V, Singleturn, 13 bit (8192 Steps; 0.044°), IP68 / IP69K, Aluminum / Steel, Blind Hollow Shaft - BC ø 42-63 mm, ø 36 mm (1.42"), ø 12 mm (0.47"), Connector - Axial M12, ≤ 0.09° (Magnetic - Hall Effect), CE / UL
Available
0
| Electrical Data | |
| Supply Voltage | 8 – 32 VDC |
| Current Consumption | Typical 15 mA @24V (no load) |
| Start-Up Time | <500 ms |
| Min. Load Resistance | 5 kΩ |
| Analog Accuracy | @ 10 V = ±10 mV (with an ideal power supply) |
| Linearity | 0.15% |
| Settling Time | 32 ms (from min value to max value jump) |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| EMC: Emitted Interference | DIN EN 61000-6-4 |
| EMC: Noise Immunity | DIN EN 61000-6-2 |
| MTTF | 300.9 years @ 40 °C |
| Sensor | |
| Technology | Magnetic |
| Resolution Singleturn | 13 bit |
| Resolution Multiturn | 0 bit |
| Accuracy (INL) | ±0.0878° (≤ 12 bit) |
| Code | Analog Voltage 0 – 10 V |
| Cycle Time Base Sensor | < 100 µs |
| Minimum Measurement Range | 0 – 11.25° |
| Resolution of Output | Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) |
| Multiturn Range | Singleturn |
| Environmental Specifications | |
| Protection Class (Shaft) | IP68/IP69K |
| Protection Class (Housing) | IP68/IP69K |
| Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
| Humidity | 98% RH, no condensation |
| Mechanical Data | |
| Housing Material | Steel |
| Housing Coating | Cathodic corrosion protection (>720 hrs salt spray resistance) |
| Flange Type | Blind Hollow, ø 36 mm / ø 42 mm |
| Flange Material | Aluminum |
| Flange Coating | No Coating |
| Shaft Type | Blind Hollow, Depth = 22 mm |
| Shaft Diameter | ø 12 mm (0.47") |
| Shaft Material | Stainless Steel V2A (1.4305, 303) |
| Friction Torque | ≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F) |
| Max. Permissible Mechanical Speed | ≤ 3000 1/min |
| Shock Resistance | ≤ 200 g (half sine 11 ms, EN 60068-2-27) |
| Permanent Shock Resistance | ≤ 20 g (half sine 11ms, ≤5 g (half sinus 30 ms) |
| Vibration Resistance | ≤ 20 g (20 Hz – 2000 Hz, EN 60068-2-6) |
| Length | 54,2 mm (2.13") |
| Weight | 155 g (0.34 lb) |
| Maximum Axial / Radial Misalignment | Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm |
| Electrical Connection | |
| Connection Orientation | Axial |
| Connector | M12, Male, 5 pin, a coded |
| Certification | |
| Approval | CE + cULus |
| Product Life Cycle | |
| Product Life Cycle | Established |
 |
| Connection Plan | |
| SIGNAL | CONNECTOR | PIN NUMBER |
| Power Supply | Connector 1 | 2 |
| GND | Connector 1 | 3 |
| Analog Output | Connector 1 | 1 |
| Set1/Direction | Connector 1 | 5 |
| Set2/Zero Set | Connector 1 | 4 |
Connector-View on Encoder
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
Watch a simple installation video
