POSITAL
Incorrect email or password. Please try again.
Print Send as Email

IXARC Absolute Rotary Encoder

OCF-S101G-0012-B14S-5RE

POSITAL Measuring Tools & Sensors SSI / SSI + Incremental - Gray, Singleturn, 12 bit (4096 Steps; 0.088°), IP67, Aluminum / Steel, Blind Hollow Shaft - BC ø 63 mm, ø 58 mm (2.28"), ø 14 mm (0.55"), Cable - Radial 5 m, ≤ 0.02° (Optical), ATEX - Zone 2 & 22 Available 0
picture-bx-5-crx-cx-nnn.jpg
Interface
InterfaceSSI with Preset
Manual FunctionsPreset + complement via cable or connector
Interface Cycle Time≥ 25 µs
ocx_s1_zeroset.jpg
ocx_s1_direction.jpg
Outputs
Output DriverRS422
Electrical Data
Supply Voltage4.5 – 30 VDC
Power Consumption≤ 1.5 W
Start-Up Time< 1 s
Clock InputRS 422, via Optocoupler
Clock Frequency100 kHz – 2 MHz
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF16.2 years @ 40 °C
Sensor
TechnologyOptical
Resolution Singleturn12 bit
Accuracy (INL)±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)
CodeGray
Environmental Specifications
Protection Class (Shaft)IP66/IP67
Protection Class (Housing)IP66/IP67
Operating Temperature-30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F)
Humidity98% RH, no condensation
Mechanical Data
Housing MaterialSteel
Housing CoatingWet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange TypeBlind Hollow, ø 58 mm (B)
Flange MaterialAluminum
Shaft TypeBlind Hollow, Depth = 30 mm
Shaft Diameterø 14 mm (0.55")
Shaft MaterialStainless Steel V2A (1.4305, 303)
Rotor Inertia≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 3000 1/min
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length71,2 mm (2.80")
Weight885 g (1.95 lb)
Maximum Axial / Radial MisalignmentStatic ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
Electrical Connection
Connection OrientationRadial
Cable Length5 m [197"]
Wire Cross Section0.14 mm² / AWG 26
Material / TypePVC
Cable Diameter6 mm (0.24 in)
Minimum Bend Radius46 mm (1.81") fixed, 61 mm (2.4") flexing
Certification
ApprovalCE + ATEX Zone 2 & 22
Product Life Cycle
Product Life CycleEstablished
Connection Plan
SIGNALCABLE COLOR
Power SupplyBrown
GNDWhite
Data+Gray
Data-Pink
Clock+Green
Clock-Yellow
PresetBlue
DIRRed
ShieldingShield
Dimensional Drawing

If the drawings are not available please refer to the "Download" section.

The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.