IXARC Absolute Rotary Encoder
OCE-EIC1B-1213-F100-HFG
POSITAL
Measuring Tools & Sensors
Profinet, Multiturn - 12 bit (4096 rev), 13 bit (8192 Steps; 0.044°), IP64 / IP65, Aluminum / Steel, Solid Shaft - Clamping, ø 78 mm (3.07"), ø 10 mm (0.39"), Connection Cap - 2 x Blind Plug, Axial, ≤ 0.02° (Optical), ATEX - Zone 1 & 21 (Oil+Gas)
Available
0
Interface Interface Profinet Profile Profidrive Profile 4.x, Encoder Profile 4.0, 4.1, 4.2 Diagnostics Different faults and warnings for Memory, Temperature, Synchronization, Commissioning diagnostics, Commissioning invalid scaling, Communication, Master’s sign of life Features Boot-Loader, Round Axis, Flashing LEDs, MRP, MRPD, Acceleration values Transmission Rate 100 Mbit Interface Cycle Time ≥ 125 µs Programming Functions Resolution, time base and filter for velocity, preset, counting direction, IP-Address, Fractional scaling, Encoder parameter control via GSDML or Non-Volatile memory
Outputs Output Driver Ethernet
Electrical Data Supply Voltage 10 – 32 VDC Power Consumption ≤ 3 W Start-Up Time < 15 s Reverse Polarity Protection Yes Short Circuit Protection Yes EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2 MTTF 95 years @ 40 °C
Sensor Technology Optical Resolution Singleturn 13 bit Resolution Multiturn 12 bit Multiturn Technology Mechanical Gearing (no Battery) Accuracy (INL) ±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit) Code Binary
Environmental Specifications Protection Class (Shaft) IP65 Protection Class (Housing) IP66/IP67 Operating Temperature -40 °C (-40 °F) - +70 °C (+158 °F) Storage Temperature -40 °C (-40 °F) – +85 °C (+185 °F) Humidity 98% RH, no condensation
Mechanical Data Connection Cap Material Aluminum Housing Material Aluminum Housing Coating Eloxide Flange Type Clamp, ø 78 mm, ATEX Flange Material Aluminum Shaft Type Solid, Single Flat, Length = 20 mm Shaft Diameter ø 10 mm (0.39") Rotor Inertia ≤ 35 gcm² [≤ 0.2 oz-in²] Friction Torque ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) Max. Permissible Mechanical Speed ≤ 3000 1/min Shock Resistance ≤ 100 g (half sine 11 ms, EN 60068-2-27) Vibration Resistance ≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6) Length 150 mm (5.91") Weight 1200 g (2.65 lb)
Electrical Connection Connection Orientation Radial Connection Type 2 x Blind Plug, Axial
Product Life Cycle Product Life Cycle New
Connection Plan SIGNAL CONNECTOR PIN NUMBER GND Connector 1 1 Power Supply Connector 1 2 Rx- Connector 1 5 Tx- Connector 1 6 Rx+ Connector 1 7 Tx+ Connector 1 8
Connector-View on Encoder
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.