IXARC Absolute Rotary Encoder
OCD-S3C1B-0016-C10V-PAL
POSITAL
Measuring Tools & Sensors
SSI / SSI + Incremental - Binary + A/B (RS-422), Singleturn, 16 bit (65536 Steps; 0.005°), IP67, Stainless Steel - V2A (1.4305, 303), Solid Shaft - Clamping, ø 58 mm (2.28"), ø 10 mm (0.39"), Connector - Axial M23, ≤ 0.02° (Optical), CE / UL
Available
0
Interface | |
Interface | SSI with Preset and Incr. |
Optional Incremental Pulses | 4096 |
Manual Functions | Preset + complement via cable or connector |
Interface Cycle Time | ≥ 25 µs |
Outputs | |
Output Driver | SSI (RS422) / Incr. (RS422) |
Output Incremental | A, /A, B, /B |
Quadrature Phasing | 90° ± 4.5° electrical |
Max. Frequency Response | 2 MHz |
Electrical Data | |
Supply Voltage | 4.5 – 30 VDC |
Power Consumption | ≤ 1.5 W |
Start-Up Time | < 1 s |
Clock Input | RS 422, via Optocoupler |
Clock Frequency | 100 kHz – 2 MHz |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
MTTF | 16.2 years @ 40 °C |
Sensor | |
Technology | Optical |
Resolution Singleturn | 16 bit |
Accuracy (INL) | ±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit) |
Code | Binary |
Incremental Pulses | 4096 |
Environmental Specifications | |
Protection Class (Shaft) | IP66/IP67 |
Protection Class (Housing) | IP66/IP67 |
Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
Humidity | 98% RH, no condensation |
Mechanical Data | |
Housing Material | Stainless Steel V2A (1.4305, 303) |
Housing Coating | No Coating |
Flange Type | Clamp, ø 58 mm (C) |
Flange Material | Stainless steel V2A (1.4305; 303) |
Shaft Type | Solid, Single Flat, Length = 20 mm |
Shaft Diameter | ø 10 mm (0.39") |
Shaft Material | Stainless Steel V2A (1.4305, 303) |
Max. Shaft Load | Axial 40 N, Radial 110 N |
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr) | 430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N) |
Rotor Inertia | ≤ 30 gcm² [≤ 0.17 oz-in²] |
Friction Torque | ≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F) |
Max. Permissible Mechanical Speed | ≤ 3000 1/min |
Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) |
Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) |
Length | 41,7 mm (1.64") |
Weight | 600 g (1.32 lb) |
Electrical Connection | |
Connection Orientation | Axial |
Connector | M23, Male, 12 pin, CCW / left |
Certification | |
Approval | CE + cULus |
Product Life Cycle | |
Product Life Cycle | Established |
|
Connection Plan | |
SIGNAL | PIN NUMBER |
Power Supply | 11 |
GND | 12 |
Data+ | 3 |
Data- | 4 |
Clock+ | 2 |
Clock- | 1 |
DIR | 8 |
Preset | 9 |
A | 5 |
/A | 6 |
B | 7 |
/B | 10 |
Shielding | Shell |
Connector-View on Encoder
Pulse Diagram
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.