| Interface | BiSS C |
| Profil | BiSS BP3 Standard Encoder Profile |
| Temps de cycle de l'interface | ≥ 50 µs |
| Diagnostic | Error and Warning Bits |
| Pilote de sortie | RS422 |
| Tension d'alimentation | 4.5 – 5.5 VDC |
| Consommation de courant | Typical 32 mA, max 35 mA @5V DC |
| Protection en inversion de polarité | Non |
| Protection contre les courts-circuits | Non |
| EMC: Emission d'interférences | DIN EN 61000-6-4, customer shall verify in complete system |
| Vitesse électrique maximum admissible | 12000 1/min |
| EMC: Immunité au bruit | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| Technologie | Magnetic TMR |
| Résolution monotour | Pre-programmed 17 bit |
| Résolution multitour | Pre-programmed 16 bit |
| Précision (INL) | ±0.1° measured after calibration at room temperature (±0.36° without electronic calibration) |
| Code | Binaire |
| Min Temperature | - 40 °C (- 40 °F) |
| Max Temperature | +105 °C (221 °F) |
| Boîtier | Vissé |
| Matériau du boîtier | Acier |
| Revêtement du boîtier | e-coating (KTL) + Powder coating |
| Type d'arbre | Borgne |
| Options de fixation de l'arbre | Arbre pressé |
| Poids | 0 (0.00 lb) |
| Approval | No CE |
| Cycle de vie des produits | Echantillon de laboratoire |
