| Schnittstelle | SSI |
| Manuelle Funktionen | Preset via cable or connector |
| Schnittstellen Zykluszeit | ≥ 50 µs |
| SSI Format | 8x"0" + MT Resolution quantity of digits + ST Resolution quantity of digits + 2 diagnostic bits (Broadcom compatible) |
| Diagnose | Error and Warning Bits, Register Values |
| Programmierfunktionen | Via config pin: calibration, WIEGAND sensor test, filter selection, preset value, temperature |
| Housing Remark | Standard |
| Ausgangstreiber | RS422 |
| Anschluss | PCB Connector, male, JST-GH |
| Versorgungsspannung | 4.75 – 15 VDC |
| Stromaufnahme | Typical 32 mA, max 35 mA @5V DC |
| Leistungsaufnahme | ≤ 0.3 W |
| Einschaltzeit | < 100 ms |
| Takteingang | RS422 |
| Taktfrequenz | 300 kHz - 1 MHz |
| Verpolungsschutz | Ja |
| Kurzschluss-Schutz | Ja |
| EMC: Störaussendung | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| Max. Zulässige Elektrische Drehzahl | 12000 1/min (12bit) |
| EMV: Störfestigkeit | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| MTTF | 20 years @ 105 °C |
| Technologie | Magnetic TMR |
| Auflösung Singleturn | 13 bit |
| Auflösung Multiturn | 9 bit |
| Genauigkeit (INL) | ±0.0878° (≤12 bit) measured after calibration at room temp. |
| Code | Binär |
| Schutzart (Gehäuse) | IP30 |
| Min Temperature | - 40 °C (- 40 °F) |
| Max Temperature | +105 °C (221 °F) |
| Gehäuse | Vormontiert |
| Material Gehäuse | Stahl |
| Beschichtung des Gehäuses | e-coating (KTL) + Powder coating |
| Wellentyp | Voll |
| Material Welle | Edelstahl V4A (1.4404, 316L) |
| Optionen für die Wellenbefestigung | Welle mit Außengewinde |
| Schockfestigkeit | ≤ 200 g (half sine 6 ms, EN 60068-2-27) |
| Dauerschock | ≤ 20 g (half sine 16 ms, EN 60068-2-29) |
| Vibrationsfestigkeit | ≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6) |
| Approval | No CE |
| Lebenszyklus | Labor Muster |
| Signal | Farbe | Pin-Nummer |
|---|---|---|
| GND | Blue | 1 |
| Preset | Pink | 2 |
| Config | Gray | 3 |
| Data+ | Green | 4 |
| Data- | Yellow | 5 |
| Clock- | White | 6 |
| Clock+ | Brown | 7 |
| Power Supply | Red | 8 |
