| 接口 | SSI带预设 |
| 手动功能 | Preset via cable or connector |
| 接口周期时间 | ≥ 50 µs |
| SSI Format | 00000000MMMMMMMMMMMMMMMMSSSSSSSSSSSSSSSSS |
| 诊断 | Error and Warning Bits, Register Values |
| 编程功能 | Via config pin: Wiegand sensor test, preset value and multiturn reinitialization |
| 输出驱动器 | RS422 |
| 电源电压 | 4.5 – 5.5 VDC |
| 功耗 | Typical 32 mA, max 35 mA @5V DC |
| EMC:发射干扰 | DIN EN 61000-6-4, customer shall verify in complete system |
| EMC:抗干扰 | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| 技术 | Magnetic TMR |
| 单圈分辨率 | Pre-programmed 17 bit |
| 分辨率 多圈 | Pre-programmed 16 bit |
| 精度 (INL) | ±0.1° measured after calibration at room temperature (±0.36° without electronic calibration) |
| 认证 认证/寿命 码制 码 | 二进制码 |
| Min Temperature | - 40 °C (- 40 °F) |
| Max Temperature | +105 °C (221 °F) |
| 顶部屏蔽 | 螺丝紧固 |
| 外壳材料 | 钢 |
| 外壳涂层 | e-coating (KTL) + Powder coating |
| 轴类型 | 盲孔 |
| 轴紧固选项 | 轴上顶丝 |
| 重量 | 0 (0.00 lb) |
| Approval | No CE |
| 产品寿命周期信息 | 测试样品 |
