Remark | N and M type (MOQ) |
Supply Voltage | 4.5 – 30 VDC |
Power Consumption | ≤ 1.0 W |
Start-Up Time | < 1 s |
Weight | 315 g (0.69 lb) |
Protection Class | IP64 / IP65 |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
Max Temperature | +80 °C (+176 °F) |
Min Temperature | -20 °C (-4 °F) |
Measuring Length | 1.25 m (4.10') |
Mean Length per Revolution | 125 mm |
Wire Material | Coated Polyamide Stainless Steel |
Wire Diameter | 0.36 mm |
Housing Material | Steel |
Draw Wire Housing Material | Plastic |
Max. Angular Acceleration | 5.0 g |
Max Extension Force | 1.5 N |
Min Retraction Force | 1.0 N |
Actuation Lifetime | 1.0 mio Cycles (Estimated based on ideal conditions) |
Wire Mounting | Eyelet |
Max. Wire Exit Angle | ±3° |
Technology | Magnetic (≤ 0.09°) |
Accuracy | ±0.05 % Full Scale Output |
Full Scale Output | ±0.008 % Full Scale Output |
Resolution Singleturn | Programmable max. 16 bit, pre-programmed 13 bit |
Resolution Multiturn | Programmable max. 16 bit, pre-programmed 12 bit |
Approx. Linear Resolution | 0.1 mm/pulse (Default) |
Code | Programmable Gray or Binary, preprogrammed Binary |
Interface | Programmable SSI |
Programming Functions | Absolute: Resolution, Revolution, Code, Preset |
Manual Functions | Preset + complement via cable or connector |
Interface Cycle Time | ≥ 25 µs |
Configuration Tool | UBIFAST Configuration Tool (Version ≥ 1.6.7) |
Output Driver | RS422 |
Current Consumption | Typical 50 mA |
Clock Input | RS 422, via Optocoupler |
Clock Frequency | 100 kHz – 2 MHz |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
MTTF | 350 years @ 40 °C |
Connection Orientation | Radial |
Connection Orientation (w.r.t Draw Wire) | Radial 9 |
Connector | M23, Male, 12 pin, CCW / left |
Product Life Cycle | New |
Signal | Pin Number |
---|---|
Power Supply | 11 |
GND | 12 |
Data+ | 3 |
Data- | 4 |
Clock+ | 2 |
Clock- | 1 |
Preset | 9 |
DIR | 8 |