| Interface | BiSS C |
| Profile | BiSS BP3 Standard Encoder Profile |
| Interface Cycle Time | ≥ 50 µs |
| Diagnostics | Error and Warning Bits |
| Output Driver | RS422 |
| Supply Voltage | 4.5 – 5.5 VDC |
| Current Consumption | Typical 32 mA, max 35 mA @5V DC |
| Reverse Polarity Protection | No |
| Short Circuit Protection | No |
| EMC: Emitted Interference | DIN EN 61000-6-4, customer shall verify in complete system |
| Max. Permissible Electric Speed | 12000 1/min |
| EMC: Noise Immunity | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| Technology | Magnetic TMR |
| Resolution Singleturn | Pre-programmed 17 bit |
| Resolution Multiturn | Pre-programmed 16 bit |
| Accuracy (INL) | ±0.1° measured after calibration at room temperature (±0.36° without electronic calibration) |
| Code | Binary |
| Min Temperature | -40 °C (-40 °F) |
| Max Temperature | +105 °C (221 °F) |
| Top Shield | Screwed |
| Housing Material | Steel |
| Housing Coating | e-coating (KTL) + Powder coating |
| Shaft Type | Hub |
| Shaft Fastening Options | Shaft Pressed |
| Weight | 0 (0.00 lb) |
| Approval | No CE |
| Product Life Cycle | Lab Sample |
