| Interface | SPI |
| Interface Cycle Time | 100 μs |
| Diagnostics | MT Error Detection, Wire Test, Temperature |
| Programming Functions | Couting Direction, MT Preset, ST Preset |
| Transmission Rate | 5 MBaud |
| Interface Remark | This product falls under legal restrictions and is not permitted to be used for the production and sale of sensor systems. The use of this product is only permitted for the production and sale of other systems, such as servomotors, stepper motors, robotic systems, or machinery. |
| Connector | 6x1.8mm pitch through-holes or 6x0.93mm pitch SMD pads |
| Supply Voltage | 3.3 VDC ±10% |
| Current Consumption | Typical 35 mA, Max. 50 mA |
| Power Consumption | ≤ 0.25 W |
| Start-Up Time | < 1 s |
| Clock Frequency | < 5.0 MHz |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| Max. Permissible Electric Speed | 12000 1/min |
| MTTF | 20 years @ 105 °C |
| Technology | Magnetic |
| Resolution Singleturn | 8 bit |
| Resolution Multiturn | 40 bit |
| Accuracy (INL) | 40 bit MT counter |
| Code | Binary |
| Protection Class (Housing) | IP10 |
| Min Temperature | -20 °C (-4 °F) |
| Max Temperature | +105 °C (221 °F) |
| Top Shield | No Housing |
| Housing Coating | No Coating |
| Shaft Type | No Shaft |
| Shaft Fastening Options | Not Applicable (No Shaft) |
| Maximum Axial / Radial Misalignment | Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm |
| Weight | 0 (0.00 lb) |
| Shock Resistance | ≤ 200 g (half sine 6 ms, EN 60068-2-27) |
| Permanent Shock Resistance | ≤ 20 g (half sine 16 ms, EN 60068-2-29) |
| Vibration Resistance | ≤ 20 g (10 Hz - 2000 Hz, MIL-STD-202G, Method 204D) |
| Approval | No CE |
| Product Life Cycle | New |
| Signal | Pin Number |
|---|---|
| SPI_MOSI | 1 |
| Power Supply | 2 |
| SPI_MISO | 3 |
| GND | 4 |
| SPI_CLK | 5 |
| SPI_CS | 6 |
