
| Interface | Incremental | 
| Output Driver | Push-Pull (HTL) | 
| Quadrature Phasing | 90° ± 4.5° electrical | 
| Supply Voltage | 4.75 – 30 VDC | 
| Current Consumption | Typical 40mA @ 24V (no load) | 
| Power Consumption | ≤ 1.0 W | 
| Start-Up Time | < 250 ms | 
| Min. Load Resistance | 120 Ω (5V), 720 Ω (30 V) | 
| Reverse Polarity Protection | Yes | 
| Short Circuit Protection | Yes | 
| EMC: Emitted Interference | DIN EN 61000-6-4 | 
| EMC: Noise Immunity | DIN EN 61000-6-2 | 
| MTTF | 280 years @ 40 °C | 
| Technology | Magnetic | 
| Accuracy (INL) | ±0.0878° (≤ 12 bit) | 
| Sense Signal (Default) | Clockwise shaft movement (front view on shaft) | 
| Protection Class (Shaft) | IP65 | 
| Protection Class (Housing) | IP65 | 
| Min Temperature | -40 °C (-40 °F) | 
| Max Temperature | +85 °C (+185 °F) | 
| Humidity | 98% RH, no condensation | 
| Housing Material | Steel | 
| Housing Coating | Cathodic corrosion protection (>720 hrs salt spray resistance) | 
| Flange Type | Blind Hollow, ø 36 mm / ø 42 mm | 
| Flange Material | Aluminum | 
| Shaft Type | Blind Hollow, Depth = 18 mm | 
| Shaft Diameter | ø 6.35 mm (1/4") | 
| Shaft Material | Stainless Steel V2A (1.4305, 303) | 
| Friction Torque | ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) | 
| Max. Permissible Mechanical Speed | ≤ 12000 1/min | 
| Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) | 
| Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) | 
| Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) | 
| Length | 54,2 mm (2.13") | 
| Weight | 105 g (0.23 lb) | 
| Maximum Axial / Radial Misalignment | Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm | 
| Connection Orientation | Axial | 
| Connector | M12, Male, 8 pin, a coded | 
| Product Life Cycle | Discontinued | 

| Signal | Pin Number | 
|---|---|
| A | 3 | 
| /A | 4 | 
| B | 5 | 
| /B | 6 | 
| Z | 7 | 
| /Z | 8 | 
| Power Supply | 2 | 
| GND | 1 | 
| Shielding | Connector housing | 




