| Schnittstelle | SSI Preset |
| Manuelle Funktionen | Preset via cable or connector |
| Schnittstellen Zykluszeit |
| SSI Format | 8x"0" + MT Resolution quantity of digits + ST Resolution quantity of digits |
| Diagnose | Error and Warning Bits, Register Values |
| Programmierfunktionen | Via config pin: calibration, WIEGAND sensor test, filter selection, preset value, temperature |
| Housing Remark | Standard |
| Ausgangstreiber | RS422 |
| Anschluss | PCB Connector, male, JST-SR |
| Versorgungsspannung | 4.5 – 5.5 VDC |
| Stromaufnahme | 57 mA @5V DC |
| Leistungsaufnahme | ≤ 0.3 W |
| EMC: Störaussendung | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| EMV: Störfestigkeit | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| Technologie | Magnetic TMR |
| Auflösung Singleturn | 9 bit |
| Auflösung Multiturn | 16 bit |
| Genauigkeit (INL) | ±0.0878° (≤12 bit) measured after calibration at room temp. |
| Code | Binär |
| Schutzart (Gehäuse) | IP30 |
| Min Temperature | - 40 °C (- 40 °F) |
| Max Temperature | +105 °C (221 °F) |
| Gehäuse | Geschraubt |
| Material Gehäuse | Stahl |
| Beschichtung des Gehäuses | e-coating (KTL) |
| Wellentyp | Nabe |
| Material Welle | Messing |
| Optionen für die Wellenbefestigung | Welle gepresst |
| Gewicht | 17 g (0.04 lb) |
| Schockfestigkeit | ≤ 200 g (half sine 6 ms, EN 60068-2-27) |
| Vibrationsfestigkeit | ≤ 20 g (10 Hz – 2000 Hz, EN 60068-2-6) |
| Approval | No CE |
| Lebenszyklus | Labor Muster |
