| 接口 | Incremental RS422 |
| Pulses per Revolution | 1000, 1024 |
| Output Incremental | A, /A, B, /B, Z, /Z |
| Configuration Remark | PPR: 1000, 1024 |
| 输出驱动器 | RS 422 (TTL) |
| Output Voltage High Level RS422 (TTL) | Condition: current max. -20 mA, min. 2.4 V; condition: no... |
| Output Voltage Low Level RS422 (TTL) | Condition: current max. +20mA, max. 0.4 V; condition: no ... |
| Output Rise Time | 110 ns |
| Outfall Fall Time | 100 ns |
| Maximum Switching Current | 8 mA per Channel |
| 接口 | Latching Pin Connector, 10 pin |
| 电源电压 | 4.5 – 5.5 VDC |
| 功耗 | CPR < 500, no load: typ. 29 mA, max. 36 mA, CPR ≥ 500, no load: typ. 56 mA, max. 65 mA |
| 功耗 | ≤ 0.7 W |
| 反极性保护 | 没有 |
| 短路保护 | 没有 |
| Max Load Capacitance | 100 pF |
| 允许最高转速 | minimum value of [ (18*10^6)/PPR and 60000 ] 1/min |
| EMC Electrostatic Discharge | ± 4 kV, IEC 61000-4-2 |
| MTTF | 6404 years @ 20°C and 40 % relative humidity |
| 技术 | 光学 |
| 单圈分辨率 | Incremental without Index (Kit) |
| 分辨率 多圈 | 0 位 |
| 精度 (INL) | ±0.16° |
| Phase Angle | Pulse diagram Z: 90° ±30° |
| Duty Cycle | Pulse diagram X,Y: 180°±30° |
| 外壳防护等级 (外壳) | IP40 |
| Min Temperature | - 40 °C (- 40 °F) |
| Max Temperature | +100° C (+212° F) |
| 顶部屏蔽 | 螺丝紧固 |
| 外壳材料 | Polycarbonate 20% Glass Fiber Filled |
| 外壳涂层 | 无涂层 |
| 轴类型 | 盲孔 |
| Kit Shaft Dimension | 4 mm |
| 轴的材料 | Aluminum |
| 轴紧固选项 | 轴上顶丝 |
| 最大轴向/径向 错位 | ± 0.25 mm / ± 0.05 mm |
| Disk Radial Position Tolerance | min. ± 0.127 mm, gap set by standard spacer tool |
| 重量 | 0 (0.00 lb) |
| 转子转动惯量 | ≤ 0.56 gcm² [≤ 3.06 x 10^-3 oz-in²] |
| 耐振动性 | ≤ 20 g (5 Hz – 2000 Hz) |
| Tooling | 1-4pcs = One spacer, hex and centering tool per encoder (PO3 |
| Approval | No CE |
| 产品寿命周期信息 | 新产品 |
| 信号 | 引脚编号 |
|---|---|
| GND | 1 |
| GND | 2 |
| Not Connected | 3 |
| Not Connected | 4 |
| /A | 5 |
| A | 6 |
| Power Supply | 7 |
| Power Supply | 8 |
| /B | 9 |
| B | 10 |
