| 接口 | BiSS C with Preset |
| 接口周期时间 | ≥ 18 µs |
| 诊断 | Stator-Rotor Air Gap and Start-up Procedure Check |
| 编程功能 | Via register communication: Wiegand sensor test, preset value and multiturn reinitialization |
| Cycle of Parameter Saving | 10 000 |
| Interface Remark | 二进制码 |
| 输出驱动器 | RS422 |
| 接口 | JST SM10B-GHS-TB (JST) |
| 电源电压 | 4.5 - 26.4 VDC |
| 功耗 | Typical 200mA @ 5V (no load) |
| 启动时间 | < 1 s |
| 时钟输入 | RS422 |
| 时钟速度 | 80 kHz - 10 MHz |
| 反极性保护 | 是 |
| 短路保护 | 是 |
| EMC:发射干扰 | DIN EN 61000-6-4, customer shall verify in complete system |
| 允许最高转速 | 6000 1/min |
| EMC:抗干扰 | The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up. |
| MTTF | 105 years @ 60 °C |
| 技术 | Capacitive + Magnetic |
| 单圈分辨率 | 18 bit |
| 分辨率 多圈 | 16 位 |
| 精度 (INL) | ±0.02° |
| 认证 认证/寿命 码制 码 | 二进制码 |
| 外壳防护等级 (外壳) | IP20 |
| Min Temperature | - 40 °C (- 40 °F) |
| Max Temperature | +105 °C (221 °F) |
| 顶部屏蔽 | 螺丝紧固 |
| 外壳材料 | Plastic / Steel |
| 外壳涂层 | 电镀锌 |
| 轴类型 | 通孔 |
| 轴的材料 | Steel |
| 轴紧固选项 | 轴上顶丝 |
| 最大轴向/径向 错位 | ± 0.1 mm / ± 0.2 mm |
| Stator-Rotor Air Gap | 0.7 mm |
| 重量 | 30 g (0.07 lb) |
| 转子转动惯量 | ≤ 1000 gcm² [≤ 5.5 oz-in²] |
| 耐冲击性 | ≤ 200 g (half sine 11 ms, EN 60068-2-27) |
| 持久的抗冲击性 | ≤ 20G（11毫秒半弦波），≤5克（30毫秒半弦波） |
| 耐振动性 | ≤ 20 g (20 Hz – 2000 Hz, EN 60068-2-6) |
| Approval | No CE |
| 产品寿命周期信息 | 新产品 |
| 信号 | 引脚编号 |
|---|---|
| Data- | 1 |
| Data+ | 2 |
| Do Not Connect | 3 |
| Preset | 4 |
| Clock+ | 5 |
| Clock- | 6 |
| Power Supply | 7 |
| GND | 8 |
| Do Not Connect | 9 |
| Diagnostic | 10 |
