인터페이스 | Incremental RS422 |
Pulses per Revolution | 1000, 1024 |
Output Incremental | A, /A, B, /B, Z, /Z |
Configuration Remark | PPR: 1000, 1024 |
출력 드라이버 | RS 422 (TTL) |
Output Voltage High Level RS422 (TTL) | Condition: current max. -20 mA, min. 2.4 V; condition: no... |
Output Voltage Low Level RS422 (TTL) | Condition: current max. +20mA, max. 0.4 V; condition: no ... |
Output Rise Time | 110 ns |
Outfall Fall Time | 100 ns |
Maximum Switching Current | 8 mA per Channel |
접속 | Latching Pin Connector, 10 pin |
전압공급 | 4.5 – 5.5 VDC |
현재 소비 | CPR < 500, no load: typ. 29 mA, max. 36 mA, CPR ≥ 500, no load: typ. 56 mA, max. 65 mA |
전력소비 | ≤ 0.7 W |
아니오 | 아니 |
단락 회로 보호 | 아니 |
Max Load Capacitance | 100 pF |
최대 전기 속도 | minimum value of [ (18*10^6)/PPR and 60000 ] 1/min |
EMC Electrostatic Discharge | ± 4 kV, IEC 61000-4-2 |
MTTF | 6404 years @ 20°C and 40 % relative humidity |
과학 기술 | 광학식 |
해상도 Singleturn | Incremental without Index (Kit) |
해상도 Multiturn | 0 비트 |
정확성 (INL) | ±0.16° |
Phase Angle | Pulse diagram Z: 90° ±30° |
Duty Cycle | Pulse diagram X,Y: 180°±30° |
보호등급 (하우징) | IP40 |
Min Temperature | - 40 °C (- 40 °F) |
Max Temperature | +100° C (+212° F) |
하우징 | 스크류 |
하우징의 재질 | Polycarbonate 20% Glass Fiber Filled |
주택의 코팅 | 더 코팅 없음 |
축 형태 | 허브 |
Kit Shaft Dimension | 4 mm |
샤프트의 소재 | Aluminum |
축 고정 방법 선택 가능 | 세트 스크류 |
최대 축 / 레이디 얼오정렬 | ± 0.25 mm / ± 0.05 mm |
Disk Radial Position Tolerance | min. ± 0.127 mm, gap set by standard spacer tool |
무게 | 0 (0.00 lb) |
로터 관성 | ≤ 0.56 gcm² [≤ 3.06 x 10^-3 oz-in²] |
진동내구성 | ≤ 20 g (5 Hz – 2000 Hz) |
Tooling | 1-4pcs = One spacer, hex and centering tool per encoder (PO3 |
Approval | No CE |
제품 생애 주기정보 | 신제품 |
신호 | 핀 번호 |
---|---|
GND | 1 |
GND | 2 |
Not Connected | 3 |
Not Connected | 4 |
/A | 5 |
A | 6 |
Power Supply | 7 |
Power Supply | 8 |
/B | 9 |
B | 10 |