LINARIX Linear Sensor
LU0-S401B-1216-7W90-PRL
POSITAL
Measuring Tools & Sensors
IP64 / IP65, Draw Wire - 7 m – 15 m (22.96' – 49.21'), SSI / SSI + Incremental - Binary w. Pushbuttons, 16 bit (65536 Steps), Draw Wire Enclosure - Plastic, Connector - Radial M23, Radial 9, Magnetic (≤ 0.09°)
Available
0
General Data Supply Voltage 4.5 – 30 VDC Power Consumption ≤ 1.0 W Turn On Time < 1 s Operating Temperature -20 °C (-4 °F) - +80 °C (+176 °F) Weight 985 g (2.17 lb) Protection Class (Encoder) IP64 / IP65 EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2
Mechanical Data Max. Measurement Length 7.50 m (24.61') Length per Revolution 333.3 mm Wire Material Coated Polyamide Stainless Steel Wire Diameter 0.45 mm Encoder Housing Material Steel Draw Wire Housing Material Plastic Max. Wire Acceleration 1.5 g Max. Extension Force 13.0 N Min. Retraction Force 7.0 N Actuation Lifetime 0.5 mio Cycles (Estimated based on ideal conditions) Wire Mounting Wireclip Max. Wire Exit Angle ±3°
Sensor Data Technology Magnetic (≤ 0.09°) Accuracy ±0.05 % FSO Repeatability ±0.01 % FSO Resolution [Encoder - Singleturn] 16 bit Resolution [Encoder - Multiturn] 12 bit Approx. Linear Resolution 5.1 µm (theoretical), limited by mechanics Output Code Binary
Interface Communication Interface SSI with Button and LEDs Manual Functions Preset via push button and cable or connector Cycle Time Interface ≥ 25 µs
Outputs Output Driver RS422 Current Consumption Typical 50 mA Clock Input RS 422, via Optocoupler Clock frequency 100 kHz – 2 MHz Reverse Polarity Protection Yes Short Circuit Protection Yes MTTF 350 years @ 40 °C
Electrical Connection Connection Orientation Radial Connection Orientation (w.r.t Draw Wire) Radial 9 Connector M23, Male, 12 pin, CCW / left
Product Life Cycle Product Life Cycle Established
Connection Plan SIGNAL PIN NUMBER Power Supply 11 GND 12 Data+ 3 Data- 4 Clock+ 2 Clock- 1 Preset 9 DIR 8 Not Connected 5 Not Connected 6 Not Connected 7 Not Connected 10
Connector-View on Encoder
All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
