LINARIX Linear Sensor
LU0-S401B-1216-1N6A-ARW
POSITAL
Measuring Tools & Sensors
IP54, Draw Wire - 1 m – 2.9 m (3.28' – 9.51'), SSI / SSI + Incremental - Binary w. Pushbuttons, 16 bit (65536 Steps), Draw Wire Enclosure - Plastic, Cable - Radial 10 m, Radial 6, Magnetic (≤ 0.09°)
Available
0
This is an exiting product! It will be discontinued soon.
General Data Remark Minimum Lotsize / MOQ = 50 pieces Please contact us for pricing information. Supply Voltage 4.5 – 30 VDC Power Consumption ≤ 1.0 W Turn On Time < 1 s Operating Temperature -20 °C (-4 °F) - +80 °C (+176 °F) Weight 605 g (1.33 lb) Protection Class (Encoder) IP54 EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2
Mechanical Data Max. Measurement Length 1.25 m (4.10') Length per Revolution 125 mm Wire Material Coated Polyamide Stainless Steel Wire Diameter 0.36 mm Encoder Housing Material Steel Draw Wire Housing Material Plastic Max. Wire Acceleration 5.0 g Max. Extension Force 1.5 N Min. Retraction Force 1.0 N Actuation Lifetime 1.0 mio Cycles (Estimated based on ideal conditions) Wire Mounting Eyelet Max. Wire Exit Angle ±3°
Sensor Data Technology Magnetic (≤ 0.09°) Accuracy ±0.05 % FSO Repeatability ±0.008 % FSO Resolution [Encoder - Singleturn] 16 bit Resolution [Encoder - Multiturn] 12 bit Approx. Linear Resolution 1.9 µm (theoretical), limited by mechanics Output Code Binary
Interface Communication Interface SSI with Button and LEDs Manual Functions Preset via push button and cable or connector Cycle Time Interface ≥ 25 µs
Outputs Output Driver RS422 Current Consumption Typical 50 mA Clock Input RS 422, via Optocoupler Clock frequency 100 kHz – 2 MHz Reverse Polarity Protection Yes Short Circuit Protection Yes MTTF 350 years @ 40 °C
Electrical Connection Connection Orientation Radial Connection Orientation (w.r.t Draw Wire) Radial 6 Cable Length 10 m [394"] Wire Cross Section 0.14 mm² / AWG 26 Material / Type PVC Cable Diameter 6 mm (0.24 in) Minimum Bend Radius 46 mm (1.81") fixed, 61 mm (2.4") flexing
Product Life Cycle Product Life Cycle Exiting
Connection Plan SIGNAL CABLE COLOR Power Supply Brown GND White Preset Blue Data+ Gray Data- Pink Clock+ Green Clock- Yellow DIR Red Shielding Shield
All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.