POSITAL
Incorrect email or password. Please try again.
Print Send as Email

LINARIX Linear Sensor

LU0-S401B-1213-1A9A-PRQ

POSITAL Measuring Tools & Sensors IP54, Draw Wire - 1 m – 2.9 m (3.28' – 9.51'), SSI / SSI + Incremental - Binary w. Pushbuttons, 13 bit (8192 Steps), Draw Wire Enclosure - Machined Metal - Rectangular Housing, Connector - Radial M12, Radial 9, Magnetic (≤ 0.09°) Available 0
This is a discontinued product!
picture-a-3-crb-mx-nnn.png
General Data
General Data
Supply Voltage4.5 – 30 VDC
Power Consumption≤ 1.0 W
Turn On Time< 1 s
Operating Temperature-40 °C (-40 °F) - +85 °C (+185 °F)
Weight640 g (1.41 lb)
Protection Class (Encoder)IP54
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Mechanical Data
Max. Measurement Length1.25 m (4.10')
Length per Revolution100 mm
Wire MaterialNylon Coated Stainless Steel
Wire Diameter0.48 mm
Encoder Housing MaterialSteel
Draw Wire Housing MaterialAnodized Al Frame, Polycarbonate Spring Housing
Max. Speed of Wire Displacement0.1 m/s
Max. Wire Acceleration1.0 g
Max. Extension Force2.34 N
Min. Retraction Force1.26 N
Actuation Lifetime1.0 mio Cycles (Estimated based on ideal conditions)
Wire MountingEyelet
Sensor Data
TechnologyMagnetic (≤ 0.09°)
Accuracy±0.04 % FSO
Repeatability±0.02 % FSO
Resolution [Encoder - Singleturn]13 bit
Resolution [Encoder - Multiturn]12 bit
Approx. Linear Resolution12.2 µm
Output CodeBinary
Interface
Communication InterfaceSSI with Button and LEDs
Manual FunctionsPreset via push button and cable or connector
Cycle Time Interface≥ 25 µs
Outputs
Output DriverRS422
Current ConsumptionTypical 50 mA
Clock InputRS 422, via Optocoupler
Clock frequency100 kHz – 2 MHz
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF350 years @ 40 °C
Electrical Connection
Connection OrientationRadial
Connection Orientation (w.r.t Draw Wire)Radial 9
ConnectorM12, Male, 8 pin, a coded
Product Life Cycle
Product Life CycleDiscontinued
Connection Plan
SIGNALPIN NUMBER
Power Supply2
GND1
Data+5
Data-6
Clock+3
Clock-4
Preset7
DIR8
ShieldingConnector Housing
Connector-View on Encoder
Rotation Clockwise (seen on shaft)
Dimensional Drawing
2D Drawing

All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.