Incorrect email or password. Please try again.
Print Send as Email

LINARIX Linear Sensor


POSITAL Measuring Tools & Sensors IP64 / IP65, Draw Wire - 3 m – 6.9 m (9.84' – 22.63'), SSI / SSI + Incremental - Binary, 16 bit (65536 Steps), Draw Wire Enclosure - Machined Metal - Rectangular Housing, Cable - Radial 2 m, Radial 6, Magnetic (≤ 0.09°) Available 0
This is an exiting product! It will be discontinued soon.
General Data
General Data
Supply Voltage4.5 – 30 VDC
Power Consumption≤ 1.0 W
Turn On Time< 1 s
Operating Temperature-30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F)
Weight715 g (1.58 lb)
Protection Class (Encoder)IP64 / IP65
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Mechanical Data
Max. Measurement Length3.00 m (9.84')
Length per Revolution200 mm
Wire MaterialPlastic Coated Stainless Steel
Wire Diameter0.61 mm
Encoder Housing MaterialSteel
Draw Wire Housing MaterialZinc Die-cast
Max. Speed of Wire Displacement0.8 m / s
Max. Wire Acceleration1.0 g
Max. Extension Force3.0 N
Min. Retraction Force2.5 N
Actuation LifetimeNot Available
Wire MountingM6 Thread
Max. Wire Exit Angle±0°
Sensor Data
TechnologyMagnetic (≤ 0.09°)
Accuracy±0.012 % FSO
Repeatability±0.005 % FSO
Resolution [Encoder - Singleturn]16 bit
Resolution [Encoder - Multiturn]12 bit
Approx. Linear Resolution3.1 µm (theoretical), limited by mechanics
Output CodeBinary
Communication InterfaceSSI with Preset
Manual FunctionsPreset + complement via cable or connector
Cycle Time Interface≥ 25 µs
Output DriverRS422
Current ConsumptionTypical 50 mA
Clock InputRS 422, via Optocoupler
Clock frequency100 kHz – 2 MHz
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF350 years @ 40 °C
Electrical Connection
Connection OrientationRadial
Connection Orientation (w.r.t Draw Wire)Radial 6
ConnectorCable 2 m
Cable Length2 m [79"]
Wire Cross Section0.14 mm² / AWG 26
Material / TypePVC
Cable Diameter6 mm (0.24 in)
Minimum Bend Radius46 mm (1.81") fixed, 61 mm (2.4") flexing
Product Life Cycle
Product Life CycleExiting
Connection Plan
Power SupplyBrown
Dimensional Drawing
2D Drawing

All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.