LINARIX Linear Sensor
LU0-CA01B-1213-1N00-PRM
POSITAL
Measuring Tools & Sensors
IP64 / IP65, Draw Wire - 1 m – 2.9 m (3.28' – 9.51'), CANopen, 13 bit (8192 Steps), Draw Wire Enclosure - Plastic, Connector - Radial M12, Radial 0 / Axial, Magnetic (≤ 0.09°)
Available
0
General Data Remark Minimum Lotsize / MOQ = 50 pieces Supply Voltage 9 – 30 VDC Power Consumption ≤ 1.2 W Operating Temperature -20 °C (-4 °F) - +80 °C (+176 °F) Weight 280 g (0.62 lb) Protection Class (Encoder) IP64 / IP65 EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2
Mechanical Data Max. Measurement Length 1.25 m (4.10') Length per Revolution 125 mm Wire Material Coated Polyamide Stainless Steel Wire Diameter 0.36 mm Encoder Housing Material Steel Draw Wire Housing Material Plastic Max. Wire Acceleration 5.0 g Max. Extension Force 1.5 N Min. Retraction Force 1.0 N Actuation Lifetime 1.0 mio Cycles (Estimated based on ideal conditions) Wire Mounting Eyelet Max. Wire Exit Angle ±3°
Sensor Data Technology Magnetic (≤ 0.09°) Accuracy ±0.05 % FSO Repeatability ±0.008 % FSO Resolution [Encoder - Singleturn] 13 bit Resolution [Encoder - Multiturn] 12 bit Approx. Linear Resolution 15.3 µm Output Code Binary
Interface Communication Interface CANopen Profile DS-406 Programming Functions Resolution, preset, 2 limit switches, 8 CAMS, baud rate, CAN-Identifier, bootloader, transmission modes: polled, cyclic, sync Transmission Rate min. 20 kBaud, max. 1 MBaud Cycle Time Interface ≥ 1 ms
Outputs Output Driver Transceiver (ISO 11898), Galvanically Isolated by Opto-Coupl Current Consumption ≤ 70 mA @ 10 V DC, ≤ 50 mA @ 24 V DC Reverse Polarity Protection Yes Short Circuit Protection Yes MTTF 240 years @ 40 °C
Electrical Connection Connection Orientation Radial Connection Orientation (w.r.t Draw Wire) Radial 0 / Axial Connection Type Cable / Connector Connector M12, Male, 5 pin, a coded
Product Life Cycle Product Life Cycle Established
Connection Plan SIGNAL PIN NUMBER Power Supply 2 GND 3 CAN High 4 CAN Low 5 CAN GND 1
Connector-View on Encoder
All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
