Incorrect email or password. Please try again.
Print Send as Email

LINARIX Linear Sensor


POSITAL Measuring Tools & Sensors IP64 / IP65, Draw Wire - 1 m – 2.9 m (3.28' – 9.51'), Analog - Voltage 0-10V, 13 bit (8192 Steps), Draw Wire Enclosure - Machined Metal - Rectangular Housing, Connector - Radial M12, Radial 0 / Axial, Magnetic (≤ 0.09°) Available 0
This product is a prototype
General Data
General Data
Supply Voltage8 – 32 VDC
Turn On Time<500 ms
Operating Temperature-30 °C (-22 °F) - +70 °C (+158 °F)
Weight1355 g (2.99 lb)
Protection Class (Encoder)IP64 / IP65
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Mechanical Data
Max. Measurement Length2.00 m (6.56')
Length per Revolution200 mm
Wire MaterialStainless Steel
Wire Diameter1.35 mm
Encoder Housing MaterialSteel
Draw Wire Housing MaterialAnodized Aluminium
Max. Speed of Wire Displacement8.0 m / s
Max. Extension Force15.0 N
Min. Retraction Force5.0 N
Actuation Lifetime1.0 mio Cycles (Estimated based on ideal conditions)
Wire MountingEyelet
Max. Wire Exit Angle±3°
Sensor Data
TechnologyMagnetic (≤ 0.09°)
Accuracy± 0.10 % FSO
Repeatability±0.05 % FSO
Resolution [Encoder - Singleturn]13 bit
Resolution [Encoder - Multiturn]4 bit
Approx. Linear Resolution24.4 µm
Output CodeAnalog Voltage 0 – 10 V
Resolution of OutputMax. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees)
Multiturn Range16 turn (default setting). User can use the scaling functionality to measure up to 65536 turns.
Communication InterfaceAnalog Voltage
Manual FunctionsStart and End point via Cable or Connector
Electrical Data
Current ConsumptionTypical 15 mA @24V (no load)
Min. Load Resistance5 kΩ
Analog Accuracy@ 10 V = ±10 mV (with an ideal power supply)
Settling Time32 ms (from min value to max value jump)
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF257.6 years @ 40 °C
Electrical Connection
Connection OrientationRadial
Connection Orientation (w.r.t Draw Wire)Radial 0 / Axial
ConnectorM12, Male, 5 pin, a coded
Product Life Cycle
Product Life CyclePrototype
Connection Plan
Power SupplyConnector 12
GNDConnector 13
Analog OutputConnector 11
Set1/DirectionConnector 15
Set2/Zero SetConnector 14
Connector-View on Encoder
Dimensional Drawing
2D Drawing

All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.