LINARIX Linear Sensor
LU0-AC005-0413-7W00-5RW
POSITAL
Measuring Tools & Sensors
IP64 / IP65, Draw Wire - 7 m – 15 m (22.96' – 49.21'), Analog - Current 4-20mA, 13 bit (8192 Steps), Draw Wire Enclosure - Plastic, Cable - Radial 5 m, Radial 0 / Axial, Magnetic (≤ 0.09°)
Available
0
General Data Supply Voltage 8 – 32 VDC Turn On Time <500 ms Operating Temperature -20 °C (-4 °F) - +80 °C (+176 °F) Weight 1185 g (2.61 lb) Protection Class (Encoder) IP64 / IP65 EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2
Mechanical Data Max. Measurement Length 7.50 m (24.61') Length per Revolution 333.3 mm Wire Material Coated Polyamide Stainless Steel Wire Diameter 0.45 mm Encoder Housing Material Steel Draw Wire Housing Material Plastic Max. Wire Acceleration 1.5 g Max. Extension Force 13.0 N Min. Retraction Force 7.0 N Actuation Lifetime 0.5 mio Cycles (Estimated based on ideal conditions) Wire Mounting Wireclip Max. Wire Exit Angle ±3°
Sensor Data Technology Magnetic (≤ 0.09°) Accuracy ±0.05 % FSO Repeatability ±0.01 % FSO Resolution [Encoder - Singleturn] 13 bit Resolution [Encoder - Multiturn] 4 bit Approx. Linear Resolution 40.7 µm Output Code Analog Current 4 – 20 mA Resolution of Output Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) Multiturn Range 16 turn (default setting). User can use the scaling functionality to measure up to 65536 turns.
Interface Communication Interface Analog Current Manual Functions Start and End point via Cable or Connector
Electrical Data Current Consumption Typical 20 mA @24 V (no load) Max Load Resistance 500 Ω Analog Accuracy @ 20 mA = ±20 µA (with an ideal power supply) Settling Time 32 ms (from min value to max value jump) Reverse Polarity Protection Yes Short Circuit Protection Yes MTTF 240.8 years @ 40 °C
Electrical Connection Connection Orientation Radial Connection Orientation (w.r.t Draw Wire) Radial 0 / Axial Cable Length 5 m [197"] Wire Cross Section 0.14 mm² / AWG 26 Material / Type PVC Cable Diameter 6 mm (0.24 in) Minimum Bend Radius 46 mm (1.81") fixed, 61 mm (2.4") flexing
Product Life Cycle Product Life Cycle Established
Connection Plan SIGNAL CABLE COLOR Power Supply Red GND Yellow Analog Output Green Set1/Direction Brown Set2/Zero Set White Shielding Shield
Connector-View on Encoder
All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
