Supply Voltage | 8 – 32 VDC |
Start-Up Time | <500 ms |
Weight | 1455 g (3.21 lb) |
Protection Class | IP64 / IP65 |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
Max Temperature | +80 °C (+176 °F) |
Min Temperature | -20 °C (-4 °F) |
Measuring Length | 5.00 m (16.40') |
Mean Length per Revolution | 315 mm |
Wire Material | Coated Polyamide Stainless Steel |
Wire Diameter | 1.00 mm |
Housing Material | Steel |
Draw Wire Housing Material | Aluminum |
Max. Speed of Wire Displacement | 2.0 m / s |
Max. Angular Acceleration | 5.0 g |
Max Extension Force | 16.0 N |
Min Retraction Force | 4.0 N |
Actuation Lifetime | 0.5 mio Cycles (Estimated based on ideal conditions) |
Wire Mounting | Eyelet |
Max. Wire Exit Angle | ±3° |
Technology | Magnetic (≤ 0.09°) |
Accuracy | ±0.02 % Full Scale Output |
Full Scale Output | ±0.002 % Full Scale Output |
Resolution Singleturn | 13 bit |
Resolution Multiturn | 4 bit |
Approx. Linear Resolution | 38.5 µm |
Code | Analog Voltage 0 – 10 V |
Resolution of Output | Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) |
Multiturn Range | 16 turn (default setting). User can use the scaling functionality to measure up to 65536 turns. |
Interface | Analog Voltage |
Manual Functions | Programmable Start and End point via Cable or Connector or Push Button |
Current Consumption | Typical 15 mA @24V (no load) |
Min. Load Resistance | 5 kΩ |
Analog Accuracy | @ 10 V = ±10 mV (with an ideal power supply) |
Settling Time | 32 ms (from min value to max value jump) |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
MTTF | 257.6 years @ 40 °C |
Connection Orientation | Radial |
Connection Orientation (w.r.t Draw Wire) | Radial 0 / Axial |
Connector | M12, Male, 5 pin, a coded |
Product Life Cycle | Established |
Signal | Connector | Pin Number |
---|---|---|
Power Supply | 1 | 2 |
GND | 1 | 3 |
Analog Output | 1 | 1 |
Set1/Zero Set | 1 | 5 |
Set2/DIR | 1 | 4 |