| Supply Voltage | 8 – 32 VDC |
| Start-Up Time | <500 ms |
| Min Temperature |
| -20 °C (-4 °F) |
| Max Temperature | +80 °C (+176 °F) |
| Weight | 1025 g (2.26 lb) |
| Protection Class | IP64 / IP65 |
| EMC: Emitted Interference | DIN EN 61000-6-4 |
| EMC: Noise Immunity | DIN EN 61000-6-2 |
| Measuring Length | 7.50 m (24.61') |
| Mean Length per Revolution | 333.3 mm |
| Wire Material | Coated Polyamide Stainless Steel |
| Wire Diameter | 0.45 mm |
| Housing Material | Steel |
| Draw Wire Housing Material | Plastic |
| Max. Angular Acceleration | 1.5 g |
| Max Extension Force | 13.0 N |
| Min Retraction Force | 7.0 N |
| Actuation Lifetime | 0.5 mio Cycles (Estimated based on ideal conditions) |
| Wire Mounting | Wireclip |
| Max. Wire Exit Angle | ±3° |
| Technology | Magnetic (≤ 0.09°) |
| Accuracy | ±0.05 % Full Scale Output |
| Repeatability | ±0.01 % Full Scale Output |
| Resolution Singleturn | 13 bit |
| Resolution Multiturn | 4 bit |
| Approx. Linear Resolution | 40.7 µm |
| Code | Analog Voltage 0.5 – 4.5 V |
| Resolution of Output | Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) |
| Multiturn Range | 16 turn (default setting). User can use the scaling functionality to measure up to 65536 turns. |
| Interface | Analog Voltage |
| Manual Functions | Start and End point via Cable or Connector |
| Current Consumption | Typical 15 mA @24V (no load) |
| Min. Load Resistance | 5 kΩ |
| Analog Accuracy | @ 10 V = ±10 mV (with an ideal power supply) |
| Settling Time | 32 ms (from min value to max value jump) |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| MTTF | 257.6 years @ 40 °C |
| Connection Orientation | Radial |
| Connection Orientation (w.r.t Draw Wire) | Radial 9 |
| Connector | M12, Male, 5 pin, a coded |
| Product Life Cycle | Established |
