POSITAL
Incorrect email or password. Please try again.
Print Send as Email

Kit Encoder

KCD-FS00B-4008-PF1B-070

POSITAL Measuring Tools & Sensors , , , No Face Mount, No Housing, SPI, New, Absolute - 8 bit (Multiturn Module), Multiturn - 40 bit (1099511627776 rev), Not Applicable (No Shaft), Not Applicable (No Shaft), No Shaft, Multiturn (Magnetic), Available 0
picture-0-0.png
Interface
InterfaceSPI
Interface Cycle Time100 μs
DiagnosticsMT Error Detection, Wire Test, Temperature
Transmission Rate5 MBaud
Outputs
Connector6x1.8mm pitch through-holes or 6x0.93mm pitch SMD pads
Electrical Data
Supply Voltage3.3 VDC ±10%
Power Consumption≤ 0.25 W
Start-Up Time< 1 s
Clock Frequency< 5.0 MHz
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
Max. Permissable Electric Speed12000 1/min
MTTF350 years @ 40 °C
Sensor
TechnologyMagnetic
Resolution Singleturn8 bit
Resolution Multiturn40 bit
Accuracy (INL)40 bit MT counter
CodeBinary
Environmental Specifications
Protection Class (Housing)IP10
Min Temperature-20 °C (-4 °F)
Max Temperature+105 °C (221 °F)
Mechanical Data
HousingNo Housing
Housing CoatingNo Coating
Shaft TypeNo Shaft
Shaft Fastening OptionsNot Applicable (No Shaft)
Maximum Axial / Radial MisalignmentStatic ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
Weight0 (0.00 lb)
Shock Resistance≤ 200 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance≤ 20 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance≤ 20 g (10 Hz - 2000 Hz, MIL-STD-202G, Method 204D)
Certification
ApprovalNo CE
Connection Plan
SIGNALPIN NUMBER
SPI_MOSI1
Power Supply2
SPI_MISO3
GND4
SPI_CLK5
SPI_CS6
Connector-View on Encoder
Dimensional Drawing
drawing-interface-kcd-xxxxx-mt-00n.gif
2D Drawing

The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.