KTD-S100B-2215-E46M-JAQ

Product Description

POSITAL IXARC Multiturn modular, kit encoder: SSI with Preset interface, Hub design.

Interface	SSI with Preset
Manual Functions	Preset via cable or connector
Interface Cycle Time

Output Driver	RS422
Connector	PCB Connector, male, JST-GH

Supply Voltage	4.75 – 15 VDC
Current Consumption	Typical 32 mA, max 35 mA @5V DC
Power Consumption	≤ 0.3 W
Start-Up Time	< 100 ms
Clock Input	RS422
Clock Frequency	300 kHz - 1 MHz
Reverse Polarity Protection	Yes
Short Circuit Protection	Yes
EMC: Emitted Interference	The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up.
Max. Permissible Electric Speed	12000 1/min
EMC: Noise Immunity	The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up.
MTTF	20 years @ 105 °C

Technology	Magnetic TMR
Resolution Singleturn	15 bit
Resolution Multiturn	22 bit
Accuracy (INL)	±0.0878° (≤12 bit) measured after calibration at room temp.
Code	Binary

Top Shield	Preassembled
Housing Material	Steel
Housing Coating	e-coating (KTL) + Powder coating
Shaft Type	Hub
Kit Shaft Dimension	6 mm
Shaft Material	Stainless Steel V4A (1.4404, 316L)
Shaft Fastening Options	Shaft Set Screw
Maximum Axial / Radial Misalignment	Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
Rotor Inertia	≤ 10 gcm² [≤ 0.06 oz-in²]
Shock Resistance	≤ 200 g (half sine 6 ms, EN 60068-2-27)
Vibration Resistance	≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6)