IXARC Incremental Encoder
UCD-IPH00-XXXXX-AAB0-2TW
POSITAL
Measuring Tools & Sensors
Programmable HTL/TTL - Default Push-Pull (HTL), Cable - Axial/Radial 2m, A, B, Z, /A, /B, /Z, IP64 / IP65, Aluminum / Steel, Blind Hollow Shaft - BC ø 42-63 mm, ø 36 mm (1.42"), ø 10 mm (0.39")
Available
0

Interface | |
Interface | Programmable Incremental |
Programming Functions | PPR (1-16384), Output, Counting Direction |
Configuration Tool | UBIFAST Configuration Tool (Version ≥ 1.6.3) |
Outputs | |
Output Driver | Push-Pull (HTL) |
Output Voltage High Level Push-Pull (HTL) | > 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage |
Output Voltage Low Level Push-Pull (HTL) | < 0.5 V |
Output Voltage High Level RS422 (TTL) | > 4 V |
Output Voltage Low Level RS422 (TTL) | < 0.5 V |
Maximum Frequency Response | 1 MHz |
Maximum Switching Current | 50 mA per Channel |
Electrical Data | |
Supply Voltage | 4.75 – 30 VDC |
Current Consumption | ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @ 24V DC |
Power Consumption | ≤ 1.0 W |
Start-Up Time | < 1 s |
Min. Load Resistance | 120 Ω |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
MTTF | 280 years @ 40 °C |
Sensor | |
Technology | Magnetic |
Accuracy (INL) | ±0.0878° (≤ 12 bit) |
Duty Cycle | 180° ± 27° (Speed > 100RPM) |
Phase Angle | 90° ± 14° (Speed > 100RPM) |
Environmental Specifications | |
Protection Class (Shaft) | IP65 |
Protection Class (Housing) | IP65 |
Operating Temperature | -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F) |
Humidity | 98% RH, no condensation |
Mechanical Data | |
Housing Material | Steel |
Housing Coating | Zinc Plated |
Flange Type | Blind Hollow, ø 36 mm (A) |
Flange Material | Aluminum |
Shaft Type | Blind Hollow, Depth = 18 mm |
Shaft Diameter | ø 10 mm (0.39") |
Shaft Material | Stainless Steel V2A (1.4305, 303) |
Friction Torque | ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) |
Max. Permissible Mechanical Speed | ≤ 6000 1/min |
Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) |
Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) |
Length | 50,2 mm (1.98") |
Weight | 405 g (0.89 lb) |
Maximum Axial / Radial Misalignment | Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm |
Electrical Connection | |
Connection Orientation | Axial/Radial |
Connection Type | Cable / Connector |
Connector | Cable 2 m |
Cable Length | 2 m [79"] |
Wire Cross Section | 0.14 mm² / AWG 26 |
Material / Type | PVC |
Cable Diameter | 6 mm (0.24 in) |
Minimum Bend Radius | 46 mm (1.81") fixed, 61 mm (2.4") flexing |
Certification | |
Approval | CE + cULus |
Product Life Cycle | |
Product Life Cycle | Exiting |
Connection Plan | |
SIGNAL | CABLE COLOR |
A | Green |
/A | Yellow |
B | Gray |
/B | Pink |
Z | Blue |
/Z | Red |
Power Supply | Brown |
GND | White |
Shielding | Shield |
Connector-View on Encoder
Pulse Diagram

Rotation Clockwise (seen on shaft)
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.