Loading..

Follow us

Legal

Terms and Conditions

Certificates & Declarations

Loading...

UTD-IPT00-XXXXX-RAF0-PRQ | Incremental encoders | POSITAL

Home
Products
Incremental encoders
Product Finder
UTD-IPT00-XXXXX-RAF0-PRQ

UTD-IPT00-XXXXX-RAF0-PRQ

UTD-IPT00-XXXXX-RAF0-PRQ

Product Description

POSITAL IXARC Programmable Incremental encoder: RS 422 (TTL) output, Synchro, ø 36 mm, ø 10 mm (0.39") shaft and IP64 / IP65 protection class.

Accessories

10071953 - Measuring Wheels 200mm-Corrugated PUR SurfaceMeasuring Wheel 200mm-Corrugated
29100380 - Coupling Disc Type-10-10Coupling Disc Type-10-10
Clamp disc with centred holeClamping Ring & Clamp Discs
10035191- AP20-00 CounterAP20-00
Cable 10 m PUR / M12 8pin Female (A) to open wireCBL-M12D-F08A-100DB-084N-001
10026904 - UBIFAST Configuration ToolUBIFAST Configuration Tool
10071996 - Spring Loaded Pivot Arm 36mmSpring loaded pivot arm 36 mm
34500800 - M12, 8pin A-Coded, FemaleCTR-M12S-F08A-NPSC

Product sections

Technical Data

Interface	Programmable Incremental
Programming Functions	PPR (1-32768), Output, Counting Direction
Programmable Output	Push-Pull (HTL) or RS422 (TTL)
Configuration Tool	Configuration Tool: UBIFAST Configuration Tool Version 1.6.10 or newer. If PPR above 16384 is required, this and all additional setups must be adjusted during production.

Output Driver	RS 422 (TTL)
Output Voltage High Level Push-Pull (HTL)	> 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL)	< 0.5 V
Output Voltage High Level RS422 (TTL)	> 4 V
Output Voltage Low Level RS422 (TTL)	< 0.5 V
Maximum Frequency Response	1 MHz
Maximum Switching Current	50 mA per Channel

Supply Voltage	4.75 – 30 VDC
Current Consumption	≤60 mA @ 5V DC, ≤30 mA @ 10V DC, ≤25 mA @ 24V DC
Power Consumption	≤ 1.0 W
Start-Up Time	< 1 s
Min. Load Resistance	120 Ω
Reverse Polarity Protection	Yes
Short Circuit Protection	Yes
EMC: Emitted Interference	DIN EN 61000-6-4
EMC: Noise Immunity

Technology	Magnetic
Accuracy (INL)	±0.0878° (≤ 12 bit)
Sense Signal (Default)	Clockwise shaft movement (front view on shaft)
Duty Cycle	180° ± 12° (Speed > 100RPM)
Phase Angle	90° ± 6° (Speed > 100RPM)

Protection Class (Shaft)	IP65
Protection Class (Housing)	IP65
Min Temperature	-40 °C (-40 °F)
Max Temperature	+85 °C (+185 °F)
Humidity	98% RH, no condensation

Housing Material	Steel
Housing Coating	Cathodic corrosion protection (>720 hrs salt spray resistance)
Flange Type	Synchro, ø 36 mm
Flange Material	Aluminum
Shaft Type	Solid, Single Flat, Length = 20 mm
Shaft Diameter	ø 10 mm (0.39")
Shaft Material	Stainless Steel V2A (1.4305, 303)
Max. Shaft Load	Axial 40 N, Radial 110 N
Friction Torque

Connection Orientation	Radial
Connector	M12, Male, 8 pin, a coded

Approval

CE + cULus

Product Life Cycle

New

DIN EN 61000-6-2

MTTF	280 years @ 40 °C

≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)

Max. Permissible Mechanical Speed

≤ 12000 1/min

Shock Resistance

≤ 100 g (half sine 6 ms, EN 60068-2-27)

Permanent Shock Resistance

≤ 10 g (half sine 16 ms, EN 60068-2-29)

Vibration Resistance

≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)

Length

52 mm (2.05")

Weight

155 g (0.34 lb)

Minimum Mechanical Lifetime(10^8 revolutions with Fa/Fr)

30 (20N/40N),10 (40N/60N), 7 (40N/80N), 3 (40N/110N)