Loading..

Follow us

Legal

Terms and Conditions

Certificates & Declarations

Loading...

UCD-IPH00-XXXXX-L120-PRQ | Incremental encoders | POSITAL

Home
Products
Incremental encoders
Product Finder
UCD-IPH00-XXXXX-L120-PRQ

UCD-IPH00-XXXXX-L120-PRQ

UCD-IPH00-XXXXX-L120-PRQ

Product Description

POSITAL IXARC Programmable Incremental encoder: Push-Pull (HTL) output, Clamp, ø 58 mm (L), ø 12 mm (0.47") shaft and IP64 / IP65 protection class.

This product will be discontinued soon.

This product is replaced by

UTD-IPH00-XXXXX-L120-PRQ

Accessories

10017235 - Coupling Disc Type-10-12Coupling Disc Type-10-12
Clamp disc with centred holeClamping Ring & Clamp Discs
10021833- Mounting Bracket for Clamping Flange w/ fixturesBracket-58-Clamp-With fixtures
10035191- AP20-00 CounterAP20-00
Cable 10 m PUR / M12 8pin Female (A) to open wireCBL-M12D-F08A-100DB-084N-001
10026904 - UBIFAST Configuration ToolUBIFAST Configuration Tool
34500800 - M12, 8pin A-Coded, FemaleCTR-M12S-F08A-NPSC

Product sections

Technical Data

Interface	Programmable Incremental
Programming Functions	PPR (1-16384), Output, Counting Direction
Programmable Output	Push-Pull (HTL) or RS422 (TTL)
Configuration Tool	UBIFAST Configuration Tool (Version ≥ 1.6.3)

Output Driver	Push-Pull (HTL)
Output Voltage High Level Push-Pull (HTL)	> 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL)	< 0.5 V
Output Voltage High Level RS422 (TTL)	> 4 V
Output Voltage Low Level RS422 (TTL)	< 0.5 V
Maximum Frequency Response	1 MHz
Maximum Switching Current	50 mA per Channel

Supply Voltage	4.75 – 30 VDC
Current Consumption	≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @ 24V DC
Power Consumption	≤ 1.0 W
Start-Up Time	< 1 s
Min. Load Resistance	120 Ω
Reverse Polarity Protection	Yes
Short Circuit Protection	Yes
EMC: Emitted Interference	DIN EN 61000-6-4
EMC: Noise Immunity

Technology	Magnetic
Accuracy (INL)	±0.0878° (≤ 12 bit)
Sense Signal (Default)	Clockwise shaft movement (front view on shaft)
Duty Cycle	180° ± 27° (Speed > 100RPM)
Phase Angle	90° ± 14° (Speed > 100RPM)

Protection Class (Shaft)	IP65
Protection Class (Housing)	IP66/IP67
Min Temperature	-40 °C (-40 °F)
Max Temperature	+85 °C (+185 °F)
Humidity	98% RH, no condensation

Housing Material	Steel
Housing Coating	Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange Type	Clamp, ø 58 mm (L)
Flange Material	Aluminum
Shaft Type	Solid, Single Flat, Length = 20 mm
Shaft Diameter	ø 12 mm (0.47")
Shaft Material	Stainless Steel V2A (1.4305, 303)
Max. Shaft Load	Axial 40 N, Radial 110 N

Connection Orientation	Radial
Connector	M12, Male, 8 pin, a coded

Approval

CE + cULus

Product Life Cycle

Exiting

DIN EN 61000-6-2

MTTF	280 years @ 40 °C

Rotor Inertia

≤ 30 gcm² [≤ 0.17 oz-in²]

Technology	Magnetic
Accuracy (INL)	±0.0878° (≤ 12 bit)
Sense Signal (Default)	Clockwise shaft movement (front view on shaft)
Duty Cycle	180° ± 27° (Speed > 100RPM)
Phase Angle	90° ± 14° (Speed > 100RPM)

Max. Permissible Mechanical Speed

≤ 12000 1/min

Shock Resistance

≤ 100 g (half sine 6 ms, EN 60068-2-27)

Permanent Shock Resistance

≤ 10 g (half sine 16 ms, EN 60068-2-29)

Vibration Resistance

≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)

Length

52,7 mm (2.07")

Weight

290 g (0.64 lb)

Minimum Mechanical Lifetime(10^8 revolutions with Fa/Fr)

430 (20N/40N), 150 (40N/60N), 100 (40N/80N), 55 (40N/110N)