| Interface |
| Output Driver | Push-Pull (HTL) |
| Output Incremental | A, /A, B, /B, Z, /Z |
| Output Voltage High Level Push-Pull (HTL) | > V-3 V |
| Output Voltage Low Level Push-Pull (HTL) | < 2.5 V |
| Supply Voltage | 5 – 30 VDC |
| Current Consumption | Typical 70 mA, Max. 150 mA |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| Technology | Optical |
| Pulses per Revolution | 1, 2, 4, 5, 6, 10, 20, 25, 29, 30, 32, 40, 50, 60, 64, 70, 72, 80, 85, 90, 100, 112, 120, 125, 128, 132, 150, 157, 158, 180, 200, 226, 250, 256, 300, 360, 375, 400, 420, 450, 480, 500, 512, 600, 667, 700, 720, 800, 1000, 1024, 1500, 1800, 2000, 2048, 2500, 3000, 3600, 4000, 4096, 5000, 10000, 12500, 20000, 40000, 50000 |
| Accuracy (INL) | ±0.10° |
| Sense Signal (Default) | Clockwise shaft movement (front view on shaft) |
| Protection Class (Shaft) | IP65 |
| Protection Class (Housing) | IP65 |
| Min Temperature | -40 °C (-40 °F) |
| Max Temperature | +80 °C (+176 °F) |
| Humidity | 98% RH, no condensation |
| Connection Cap Material | None |
| Housing Material | Aluminum |
| Housing Coating | No Coating |
| Flange Type | Through Hollow Shaft , ø 58 mm |
| Flange Material | Aluminum |
| Shaft Type | Through |
| Shaft Diameter | ø 10 mm (0.39") |
| Shaft Material | Stainless Steel V2A (1.4305, 303) |
| Max. Shaft Load | Axial 40 N, Radial 60 N |
| Rotor Inertia | ≤ 30 gcm² [≤ 0.17 oz-in²] |
| Friction Torque | ≤ 2 Ncm @ 20 °C (2.8 oz-in @ 68 °F) |
| Max. Permissible Mechanical Speed | ≤ 6000 1/min |
| Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
| Vibration Resistance | ≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6) |
| Length | 49,1 mm (1.93") |
| Weight | 1000 g (2.20 lb) |
| Maximum Axial / Radial Misalignment | ± 0.5 mm /± 0.3 mm |
| Connection Orientation | Radial |
| Connection Type | Cable / Connector |
| Product Life Cycle | New |
