POSITAL

Incorrect email or password. Please try again.
Print Send as Email

TILTIX Inclinometer

ACS-080-2-SC00-HE2-PM

POSITAL Measuring Tools & Sensors Analog - Current 4 – 20 mA + RS232, 2 Axes - ± 80°, Static / Accelerometer, CE, IP67, Fibre-Reinforced Plastic, 0.10°, 0.01°, Connector - M12 Available 0
picture-m-1e3-47x52-pm.jpg
General Specifications
Application2-Axes Position Monitoring and Leveling
Measurement Range± 80°
Absolute Accuracy±0.10° (within +/-60° range)
Resolution0.01°
Electrical Specifications
Supply Voltage10 – 30 VDC (See also Interface: Max Load Resistance)
Power Consumption (no load)≤ 0.7 W
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF350 years @ 40 °C
Environmental Specifications
Operating Temperature-40 °C (-40 °F) - +85 °C (+185 °F)
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Temperature Gradient0.004°/ K
Protection ClassIP66/IP67
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Vibration Resistance1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz)
Mechanical Specifications
Housing MaterialFibre-Reinforced PBT (Polybutylene Terephthalate)
Potting MaterialPUR (Polyurethane)
Weight100 g (0.22 lb)
Interface
InterfaceAnalog Current 4 – 20 mA + RS232
Teach InZero Positioning, Inverse Direction, Elevation Range Programming
Settling Time125 ms
Output TypeCurrent 4 – 20 mA
Max Load Resistance270 Ω @ 10 V DC (500 Ω @ 15 V DC)
Transmission RateRS232: min. 1200 Baud; max. 115200 Baud
Default Transmission RateRS232: 9600 Baud
Linearity± 0.02%

Electrical Connection
Connection TypeConnector M12
ConnectorM12, Male, 8 pin, a coded
Product Life Cycle
Product Life CycleEstablished
Certification
ApprovalCE + cULus
Connection Plan
SIGNALPIN NUMBER
Power Supply1
GND4
X-Axis, Current Output5
Y-Axis, Current Output7
Set16
Set28
RxD2
TxD3
Dimensional Drawing

drawing-1e3-47x52-pm.png
2D Drawing

All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.