Incorrect email or password. Please try again.
Print Send as Email

TILTIX Inclinometer


POSITAL Measuring Tools & Sensors Analog - Voltage 0.5 – 9.5 V, 2 Axes - ± 10°, Static / Accelerometer, CE, IP67, Fibre-Reinforced Plastic, 0.10°, 0.01°, Cable - 5 m Available 0
General Specifications
Application2-Axes Position Monitoring and Leveling
Measurement Range± 10°
Absolute Accuracy±0.10°
Cycle Time Base Sensor500 µs
Device OrientationHorizontal
Electrical Specifications
Supply Voltage10 – 30 VDC
Power Consumption (no load)≤ 0.7 W
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF400 years @ 40 °C
Environmental Specifications
Operating Temperature-30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F)
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Temperature Gradient0.004°/ K
Protection ClassIP66/IP67
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Vibration Resistance1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz)
Mechanical Specifications
Housing MaterialFibre-Reinforced PBT (Polybutylene Terephthalate)
Potting MaterialNone
Weight357 g (0.79 lb)
InterfaceAnalog Voltage 0.5 – 9.5 V
Settling Timemin 30 ms; default 200 ms (dependent on filter settings)
Output TypeVoltage 0.5 – 9.5 V
Min Load Resistance5 kΩ
Linearity± 0.02%

Electrical Connection
Connection TypeCable 5 m
Cable Length5 m [197"]
Wire Cross Section0.14 mm² / AWG 26
Material / TypePVC
Cable Diameter6 mm (0.24 in)
Minimum Bend Radius46 mm (1.81") fixed, 61 mm (2.4") flexing
Product Life Cycle
Product Life CycleNew
Connection Plan
Power SupplyRed
X-Axis, Voltage OutputGreen
Y-Axis, Voltage OutputBlue
Do Not ConnectGray
Do Not ConnectPink
Do Not ConnectWhite
Dimensional Drawing
2D Drawing

All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.