Accessories
Coupling Jaw Type 10-10 (ATEX)
10043055- Coupling Jaw Type 10-10 (Zone 1+21)
POSITAL Accessories 10043055- Coupling Jaw Type 10-10 (Zone 1+21), Available 0General Data | |
Intro | ATEX ZONE 1+21 II 2 G c T4 II 2 D c 135 °C |
Coupling Type | Jaw Coupling (ATEX Zone 1+21) |
Ød1 (Hub 1 Diameter) | 10 mm |
Ød2 (Hub 2 Diameter) | 10 mm |
Hub/ Flange Material | SS 1.4305 |
Spider / Disc Membrane / Bellow Material | Polyurethane |
Coupling Max. Operation Speed | 10000 RPM |
Coupling Mass Moment of Inertia | 0.02 kgcm2 |
Clamping Torque Max | 1.4 Nm |
Torsion Spring Stiffness | 37 Nm/rad |
Radial Spring Stiffness | 74 N/mm |
Maximun Torque | 2.8 Nm |
Shaft Offset (max. Axial) | ± 0.7 mm |
Shaft Offset (max. Radial) | ± 0.1 mm |
Shaft Offset (max. Angular) | ± 0.8° |
Mechanical Data | |
Operating Temperature | -10°C to 70°C / 14°F to 158°F |
Weight | 50 g |
All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.