Accessories
Coupling Jaw Type-12-3/8in
10027488 - Coupling Jaw Type-12-3/8"
POSITAL Accessories 10027488 - Coupling Jaw Type-12-3/8", Available 0
| General Data | |
| Intro | Two concentrically machines hubs with curved jaws and clamping screws. Elastomer is press fit for zero backlash and the hubs are electrically isolated as well. |
| Coupling Type | Jaw Coupling |
| Ød1 (Hub 1 Diameter) | 12 mm |
| Ød2 (Hub 2 Diameter) | 3/8" |
| Hub/ Flange Material | Aluminium |
| Spider / Disc Membrane / Bellow Material | Polyurethane |
| Coupling Max. Operation Speed | 15000 RPM |
| Coupling Mass Moment of Inertia | 0.02 kgcm2 |
| Clamping Torque Max | 2 Nm |
| Torsion Spring Stiffness | 53 Nm/rad |
| Radial Spring Stiffness | 106 N/mm |
| Maximun Torque | 4 Nm |
| Shaft Offset (max. Axial) | ± 1 mm |
| Shaft Offset (max. Radial) | ± 0.2 mm |
| Shaft Offset (max. Angular) | ± 1.2° |
| Mechanical Data | |
| Operating Temperature | -30°C to 100°C / -22°F to 212°F |
| Weight | 30 g |
All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.