POSITAL

Incorrect email or password. Please try again.
Print Send as Email

IXARC Absolute Rotary Encoder

UCD-S101G-1212-V6SA-2RW

POSITAL Measuring Tools & Sensors SSI / SSI + Incremental - Gray, Multiturn - 12 bit (4096 rev), 12 bit (4096 Steps; 0.088°), IP54, Aluminum / Steel, Blind Hollow Shaft - BC ø 42 mm, ø 36 mm (1.42"), ø 6 mm (0.24"), Cable - Radial 2 m, ≤ 0.09° (Magnetic), CE / UL Available 0
picture-vx-3-crx-gx-nnn.jpg
Interface
InterfaceSSI with Preset
Manual FunctionsPreset + complement via cable or connector
Interface Cycle Time≥ 25 µs
Number of Preset Cycles5,100,000
SSI FormatMMMMMMMMMMMMSSSSSSSSSSSS00
Video Manualvideo-link Watch a simple installation video
ucx_s1_zeroset.jpg
ucx_s1_direction.jpg
Outputs
Output DriverRS422
Electrical Data
Supply Voltage4.5 – 30 VDC
Current ConsumptionTypical 50 mA
Power Consumption≤ 1.0 W
Start-Up Time< 1 s
Clock InputRS 422, via Optocoupler
Clock Frequency100 kHz – 2 MHz
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF350 years @ 40 °C
Sensor
TechnologyMagnetic
Resolution Singleturn12 bit
Resolution Multiturn12 bit
Multiturn TechnologySelf powered magnetic pulse counter (no battery, no gear)
Accuracy (INL)±0.0878° (≤ 12 bit)
Sense Signal (Default)Clockwise shaft movement (front view on shaft)
CodeGray
Environmental Specifications
Protection Class (Shaft)IP65
Protection Class (Housing)IP54
Operating Temperature-30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F)
Humidity98% RH, no condensation
Mechanical Data
Housing MaterialSteel
Housing CoatingCathodic corrosion protection (>720 hrs salt spray resistance)
Flange TypeBlind Hollow, ø 36 mm / ø 42 mm
Flange MaterialAluminum
Shaft TypeBlind Hollow, Depth = 18 mm
Shaft Diameterø 6 mm (0.24")
Shaft MaterialStainless Steel V2A (1.4305, 303)
Friction Torque≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 12000 1/min
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length54,2 mm (2.13")
Weight290 g (0.64 lb)
Maximum Axial / Radial MisalignmentStatic ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
Electrical Connection
Connection OrientationRadial
ConnectorCable 2 m
Cable Length2 m [79"]
Wire Cross Section0.14 mm² / AWG 26
Material / TypePVC
Cable Diameter6 mm (0.24 in)
Minimum Bend Radius46 mm (1.81") fixed, 61 mm (2.4") flexing
Product Life Cycle
Product Life CycleEstablished
Connection Plan
SIGNALCABLE COLOR
Power SupplyBrown
GNDWhite
Data+Gray
Data-Pink
Clock+Green
Clock-Yellow
PresetBlue
DIRRed
ShieldingShield
Dimensional Drawing

drawing-ucd-v6s0-q3a-n.png
drawing-mc-3-cr-360-szm-nnn09b-n-2rw-n.png
2D Drawing

The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.