POSITAL
Incorrect email or password. Please try again.
Print Send as Email

IXARC Absolute Rotary Encoder

UCD-S101B-1212-M10A-2RW

POSITAL Measuring Tools & Sensors SSI / SSI + Incremental - Binary, Multiturn - 12 bit (4096 rev), 12 bit (4096 Steps; 0.088°), IP54, Aluminum / Steel, Solid Shaft - Clamping, ø 58 mm (2.28"), ø 10 mm (0.39"), Cable - Radial 2 m, ≤ 0.09° (Magnetic - Hall Effect), CE / UL Available 0
Exiting product! Successor product is: UCD-S101B-1212-M100-2TW
picture-mx-3-crx-gx-nnn.jpg
Interface
InterfaceSSI with Preset
Manual FunctionsPreset + complement via cable or connector
Interface Cycle Time≥ 25 µs
Number of Preset Cycles5,100,000
SSI FormatMMMMMMMMMMMMSSSSSSSSSSSS00
Video Manualvideo-link Watch a simple installation video
ucx_s1_zeroset.jpg
ucx_s1_direction.jpg
Outputs
Output DriverRS422
Electrical Data
Supply Voltage4.5 – 30 VDC
Current ConsumptionTypical 50 mA
Power Consumption≤ 1.0 W
Start-Up Time< 1 s
Clock InputRS 422, via Optocoupler
Clock Frequency100 kHz – 2 MHz
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF350 years @ 40 °C
Sensor
TechnologyMagnetic
Resolution Singleturn12 bit
Resolution Multiturn12 bit
Multiturn TechnologySelf powered magnetic pulse counter (no battery, no gear)
Accuracy (INL)±0.0878° (≤ 12 bit)
CodeBinary
Environmental Specifications
Protection Class (Shaft)IP65
Protection Class (Housing)IP54
Operating Temperature-30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F)
Humidity98% RH, no condensation
Mechanical Data
Housing MaterialSteel
Housing CoatingCathodic corrosion protection (>720 hrs salt spray resistance)
Flange TypeClamp, ø 58 mm (M)
Flange MaterialAluminum
Shaft TypeSolid, Single Flat, Length = 20 mm
Shaft Diameterø 10 mm (0.39")
Shaft MaterialStainless Steel V2A (1.4305, 303)
Max. Shaft LoadAxial 40 N, Radial 110 N
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr)
430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N)
Rotor Inertia≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 12000 1/min
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length96 mm (3.78")
Weight365 g (0.80 lb)
Electrical Connection
Connection OrientationRadial
ConnectorCable 2 m
Cable Length2 m [79"]
Wire Cross Section0.14 mm² / AWG 26
Material / TypePVC
Cable Diameter6 mm (0.24 in)
Minimum Bend Radius46 mm (1.81") fixed, 61 mm (2.4") flexing
Product Life Cycle
Product Life CycleExiting
Connection Plan
SIGNALCABLE COLOR
Power SupplyBrown
GNDWhite
Data+Gray
Data-Pink
Clock+Green
Clock-Yellow
PresetBlue
DIRRed
ShieldingShield
Dimensional Drawing

If the drawings are not available please refer to the "Download" section.

The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.