IXARC Absolute Rotary Encoder
UCD-EIB1B-1213-L10S-PRM
POSITAL
Measuring Tools & Sensors
Profinet, Multiturn - 12 bit (4096 rev), 13 bit (8192 Steps; 0.044°), IP67, Aluminum / Steel, Solid Shaft - Clamping, ø 58 mm (2.28"), ø 10 mm (0.39"), Connector - Radial 3 x M12, ≤ 0.09° (Magnetic - Hall Effect), CE / UL
Available
0
| Interface | |
| Interface | Profinet |
| Profile | Profidrive Profile 4.x, Encoder Profile 4.x |
| Diagnostics | Memory |
| Features | Boot-Loader, Round Axis, Flashing LEDs |
| Transmission Rate | 10 / 100 Mbit |
| Interface Cycle Time | ≥ 1 ms |
| Programming Functions | Resolution, time base and filter for velocity, preset, counting direction, IP-Address |
| Outputs | |
| Output Driver | Ethernet |
| Electrical Data | |
| Supply Voltage | 10 – 30 VDC |
| Current Consumption | ≤ 230 mA @ 10 V DC, ≤ 100 mA @ 24 V DC |
| Power Consumption | ≤ 2.5 W |
| Start-Up Time | < 1 s |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| EMC: Emitted Interference | DIN EN 61000-6-4 |
| EMC: Noise Immunity | DIN EN 61000-6-2 |
| MTTF | 65 years @ 40 °C |
| Sensor | |
| Technology | Magnetic |
| Resolution Singleturn | 13 bit |
| Resolution Multiturn | 12 bit |
| Multiturn Technology | Self powered magnetic pulse counter (no battery, no gear) |
| Accuracy (INL) | ±0.0878° (≤ 12 bit) |
| Code | Binary |
| Environmental Specifications | |
| Protection Class (Shaft) | IP66/IP67 |
| Protection Class (Housing) | IP66/IP67 |
| Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
| Storage Temperature | -40 °C (-40 °F) – +85 °C (+185 °F) |
| Humidity | 98% RH, no condensation |
| Mechanical Data | |
| Housing Material | Steel |
| Housing Coating | Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance) |
| Flange Type | Clamp, ø 58 mm (L) |
| Flange Material | Aluminum |
| Shaft Type | Solid, Single Flat, Length = 20 mm |
| Shaft Diameter | ø 10 mm (0.39") |
| Shaft Material | Stainless Steel V2A (1.4305, 303) |
| Max. Shaft Load | Axial 40 N, Radial 110 N |
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr) | 430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N) |
| Rotor Inertia | ≤ 30 gcm² [≤ 0.17 oz-in²] |
| Friction Torque | ≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F) |
| Max. Permissible Mechanical Speed | ≤ 3000 1/min |
| Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
| Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) |
| Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) |
| Length | 69 mm (2.72") |
| Weight | 365 g (0.80 lb) |
| Electrical Connection | |
| Connection Orientation | Radial |
| Connector 1 | M12, Female, 4 pin, d coded |
| Connector 2 | M12, Male, 4 pin, a coded |
| Connector 3 | M12, Female, 4 pin, d coded |
| Product Life Cycle | |
| Product Life Cycle | Discontinued |
 |
| Connection Plan | |
| SIGNAL | CONNECTOR | PIN NUMBER |
| Tx+ | Connector 1 | 1 |
| Rx+ | Connector 1 | 2 |
| Tx- | Connector 1 | 3 |
| Rx- | Connector 1 | 4 |
| Power Supply | Connector 2 | 1 |
| Not Connected | Connector 2 | 2 |
| GND | Connector 2 | 3 |
| Not Connected | Connector 2 | 4 |
| Tx+ | Connector 3 | 1 |
| Rx+ | Connector 3 | 2 |
| Tx- | Connector 3 | 3 |
| Rx- | Connector 3 | 4 |
Connector-View on Encoder
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
