POSITAL
Incorrect email or password. Please try again.
Print Send as Email

IXARC Absolute Rotary Encoder

UCD-ACP05-0413-M100-PRM

POSITAL Measuring Tools & Sensors Analog - Current 4-20mA w. Pushbuttons, Multiturn - 4 bit (16 rev), 13 bit (8192 Steps; 0.044°), IP64 / IP65, Aluminum / Steel, Solid Shaft - Clamping, ø 58 mm (2.28"), ø 10 mm (0.39"), Connector - Radial M12, ≤ 0.09° (Magnetic), CE / UL Available 0
picture-mx-3-crb-mx-nnn.jpg
Interface
InterfaceAnalog Current
Manual FunctionsProgrammable Start and End point via Cable or Connector or Push Button
Video Manualvideo-link Watch a simple installation video
Electrical Data
Supply Voltage8 – 32 VDC
Start-Up Time<500 ms
Max Load Resistance500 Ω
Analog Accuracy@ 20 mA = ±20 µA (with an ideal power supply)
Linearity0.15%
Settling Time32 ms (from min value to max value jump)
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF240.8 years @ 40 °C
Sensor
TechnologyMagnetic
Resolution Singleturn13 bit
Resolution Multiturn4 bit
Multiturn TechnologySelf powered magnetic pulse counter (no battery, no gear)
Accuracy (INL)±0.0878° (≤ 12 bit)
CodeAnalog Current 4 – 20 mA
Cycle Time Base Sensor< 100 µs
Minimum Measurement Range0 – 11.25°
Resolution of OutputMax. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees)
Multiturn Range16 turn (default setting). User can use the scaling functionality to measure up to 65536 turns.
Environmental Specifications
Protection Class (Shaft)IP65
Protection Class (Housing)IP65
Operating Temperature-40 °C (-40 °F) - +85 °C (+185 °F)
Humidity98% RH, no condensation
Mechanical Data
Housing MaterialSteel
Housing CoatingCathodic corrosion protection (>720 hrs salt spray resistance)
Flange TypeClamp, ø 58 mm (M)
Flange MaterialAluminum
Shaft TypeSolid, Single Flat, Length = 20 mm
Shaft Diameterø 10 mm (0.39")
Shaft MaterialStainless Steel V2A (1.4305, 303)
Max. Shaft LoadAxial 40 N, Radial 110 N
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr)
430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N)
Rotor Inertia≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 12000 1/min
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length96 mm (3.78")
Weight255 g (0.56 lb)
Electrical Connection
Connection OrientationRadial
ConnectorM12, Male, 5 pin, a coded
Certification
ApprovalCE + cULus
Product Life Cycle
Product Life CycleEstablished
Connection Plan
SIGNALCONNECTORPIN NUMBER
Power SupplyConnector 12
GNDConnector 13
Analog OutputConnector 11
Set1/DirectionConnector 15
Set2/Zero SetConnector 14
Connector-View on Encoder
Dimensional Drawing
drawing-mcd-m100-q3a-n.png
drawing-mc-3-cr-360-szm-skb12t-n-prm-n.png
2D Drawing

The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.