IXARC Absolute Rotary Encoder
UCD-AC1P5-PPPP-R060-PRM
POSITAL
Measuring Tools & Sensors
Analog Programmable - Current 4-20mA Preset +Dir, Multiturn - Programmable, Programmable, IP64 / IP65, Aluminum / Steel, Solid Shaft - Synchro, ø 36 mm (1.42"), ø 6 mm (0.24"), Connector - Radial M12, ≤ 0.09° (Magnetic), CE / UL
Available
0

Interface | |
Interface | Programmable Analog Current (Preset + Dir) |
Manual Functions | Preset + complement via cable or connector |
Configuration Tool | UBIFAST Configuration Tool (Version ≥ 1.6.10) + Ubifast Adap |
Video Manual | Watch a simple installation video |
Programming Functions | Measurement Range, Preset Value, Output Direction, Code |
Electrical Data | |
Supply Voltage | 8 – 32 VDC |
Start-Up Time | <500 ms |
Max Load Resistance | 500 Ω |
Analog Accuracy | @ 20 mA = ±20 µA (with an ideal power supply) |
Linearity | 0.15% |
Settling Time | 32 ms (from min value to max value jump) |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
MTTF | 240.8 years @ 40 °C |
Sensor | |
Technology | Magnetic |
Resolution Singleturn | Programmable max. 13 bit, pre-programmed 13 bit |
Resolution Multiturn | Programmable max. 16 bit, pre-programmed 4 bit |
Multiturn Technology | Self powered magnetic pulse counter (no battery, no gear) |
Accuracy (INL) | ±0.0878° (≤ 12 bit) |
Code | Analog Current 4 – 20 mA |
Cycle Time Base Sensor | < 100 µs |
Minimum Measurement Range | 0 – 11.25° |
Resolution of Output | Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) |
Multiturn Range | 16 turn (default setting). User can use the UBIFAST Tool to measure up to 65536 turns. |
Environmental Specifications | |
Protection Class (Shaft) | IP65 |
Protection Class (Housing) | IP65 |
Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
Humidity | 98% RH, no condensation |
Mechanical Data | |
Housing Material | Steel |
Housing Coating | Cathodic corrosion protection (>720 hrs salt spray resistance) |
Flange Type | Synchro, ø 36 mm |
Flange Material | Aluminum |
Shaft Type | Solid, Length = 11.5 mm |
Shaft Diameter | ø 6 mm (0.24") |
Shaft Material | Stainless Steel V2A (1.4305, 303) |
Max. Shaft Load | Axial 40 N, Radial 110 N |
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr) | 40 (20 N / 40 N), 14 (40 N / 60 N), 10 (40 N / 80 N), 6 (40 N / 110 N) |
Friction Torque | ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) |
Max. Permissible Mechanical Speed | ≤ 12000 1/min |
Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) |
Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) |
Length | 39 mm (1.54") |
Weight | 180 g (0.40 lb) |
Electrical Connection | |
Connection Orientation | Radial |
Connector | M12, Male, 5 pin, a coded |
Certification | |
Approval | CE + cULus |
Product Life Cycle | |
Product Life Cycle | New |
 |
Connection Plan | |
SIGNAL | CONNECTOR | PIN NUMBER |
Power Supply | Connector 1 | 2 |
GND | Connector 1 | 3 |
Analog Output | Connector 1 | 1 |
Set1/Direction | Connector 1 | 5 |
Set2/Zero Set | Connector 1 | 4 |
Connector-View on Encoder
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.