POSITAL
Incorrect email or password. Please try again.
Print Send as Email

IXARC Absolute Rotary Encoder

OCD-S101G-1213-C10V-2AW

POSITAL Measuring Tools & Sensors SSI / SSI + Incremental - Gray, Multiturn - 12 bit (4096 rev), 13 bit (8192 Steps; 0.044°), IP67, Stainless Steel - V2A (1.4305, 303), Solid Shaft - Clamping, ø 58 mm (2.28"), ø 10 mm (0.39"), Cable - Axial 2 m, ≤ 0.02° (Optical), CE / UL Available 0
picture-c2-6-tc2-c2-nnn.jpg
Interface
InterfaceSSI with Preset
Manual FunctionsPreset + complement via cable or connector
Interface Cycle Time≥ 25 µs
ocx_s1_zeroset.jpg
ocx_s1_direction.jpg
Outputs
Output DriverRS422
Electrical Data
Supply Voltage4.5 – 30 VDC
Power Consumption≤ 1.5 W
Start-Up Time< 1 s
Clock InputRS 422, via Optocoupler
Clock Frequency100 kHz – 2 MHz
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF16.2 years @ 40 °C
Sensor
TechnologyOptical
Resolution Singleturn13 bit
Resolution Multiturn12 bit
Multiturn TechnologyMechanical Gearing (no Battery)
Accuracy (INL)±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)
CodeGray
Environmental Specifications
Protection Class (Shaft)IP66/IP67
Protection Class (Housing)IP66/IP67
Operating Temperature-40 °C fixed (-40 °F), -30 °C flexible (-22 °F) - +85 °C (+185 °F)
Humidity98% RH, no condensation
Mechanical Data
Housing MaterialStainless Steel V2A (1.4305, 303)
Housing CoatingNo Coating
Flange TypeClamp, ø 58 mm (C)
Flange MaterialStainless steel V2A (1.4305; 303)
Shaft TypeSolid, Single Flat, Length = 20 mm
Shaft Diameterø 10 mm (0.39")
Shaft MaterialStainless Steel V2A (1.4305, 303)
Max. Shaft LoadAxial 40 N, Radial 110 N
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr)
430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N)
Rotor Inertia≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 3000 1/min
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length52,7 mm (2.07")
Weight600 g (1.32 lb)
Electrical Connection
Connection OrientationAxial
ConnectorCable 2 m
Cable Length2 m [79"]
Wire Cross Section0.14 mm² / AWG 26
Material / TypePUR / PU
Cable Diameter8 mm (0.31 in)
Minimum Bend Radius40 mm (1.57") fixed, 80 (3.15") flexing
Certification
ApprovalCE + cULus
Product Life Cycle
Product Life CycleEstablished
Connection Plan
SIGNALCABLE COLOR
Power SupplyBrown
GNDWhite
Data+Gray
Data-Pink
Clock+Green
Clock-Yellow
PresetBlue
DIRRed
ShieldingShield
Dimensional Drawing

If the drawings are not available please refer to the "Download" section.

The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.