Name: UCD-SHPPP-00PP-L12S-5AW
Brand: POSITAL
SKU: UCD-SHPPP-00PP-L12S-5AW
Availability: InStock

Interface	Programmable SSI + Incremental Push Pull
Incremental Pulses	Programmable Pulses up to 16384, Default = 1024
Manual Functions	Preset + complement via cable or connector
Interface Cycle Time	≥ 25 µs
SSI Format	SSSSSSSSSSSSS0
Configuration Tool	UBIFAST Configuration Tool (Version ≥ 1.6.7)
Programming Functions	Absolute: Resolution, Revolution, Code Incremental: Pulses per Revolution, Counting Direction

Output Driver	SSI (RS422) / Incr. (Push Pull)
Output Incremental	A, /A, B, /B, Z, /Z
Quadrature Phasing	90° ± 4.5° electrical (Speed > 400RPM)
Output Voltage High Level Push-Pull (HTL)	> 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL)	< 0.5 V
Output Voltage High Level RS422 (TTL)	> 4 V
Maximum Switching Current	35 mA per Channel

Supply Voltage	4.75 – 30 VDC
Current Consumption	Typical 50mA@24V (no load)
Power Consumption	≤ 1.0 W
Start-Up Time	< 1 s
Clock Input	RS 422, via Optocoupler
Clock Frequency	100 kHz – 2 MHz
Reverse Polarity Protection	Yes
Short Circuit Protection	Yes
EMC: Emitted Interference

Technology	Magnetic
Resolution Singleturn	Programmable max. 16 bit, pre-programmed 13 bit
Resolution Multiturn	0 bit
Accuracy (INL)	±0.0878° (≤ 12 bit)
Sense Signal (Default)	Clockwise shaft movement (front view on shaft)
Code	Programmable Gray or Binary, preprogrammed Binary

Housing Material	Steel
Housing Coating	Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange Type	Clamp, ø 58 mm (L)
Flange Material	Aluminum
Shaft Type	Solid, Single Flat, Length = 20 mm
Shaft Diameter	ø 12 mm (0.47")
Shaft Material	Stainless Steel V2A (1.4305, 303)
Max. Shaft Load	Axial 40 N, Radial 110 N

Product Life Cycle

Established

UCD-SHPPP-00PP-L12S-5AW

POSITAL IXARC absolute Singleturn encoder: Programmable SSI + Incremental Push Pull interface, Clamp, ø 58 mm (L), ø 12 mm (0.47") shaft and IP67 protection class.