IXARC Absolute Rotary Encoder
MCD-AV004-0412-R060-CAW
POSITAL
Measuring Tools & Sensors
Analog - Voltage 0.5-9.5V, Multiturn - 4 bit (16 rev), 12 bit (4096 Steps; 0.088°), IP64 / IP65, Aluminum / Steel, Solid Shaft - Synchro, ø 36 mm (1.42"), ø 6 mm (0.24"), Cable - Axial 1 m, ≤ 0.36° (Magnetic), CE / UL
Available
0
| Electrical Data | |
| Supply Voltage | 12 – 30 VDC |
| Current Consumption | Typical 15 mA |
| Start-Up Time | < 250 ms |
| Min. Load Resistance | 10 KΩ (Min. value for supply voltage 12 V. For higher supply voltage lower load resistances can be used) |
| Analog Accuracy | @ 5V = ± 15 mV; @10 V = ±25 mV |
| Linearity | 0.15% |
| Settling Time | 80 ms |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| EMC: Emitted Interference | DIN EN 61000-6-4 |
| EMC: Noise Immunity | DIN EN 61000-6-2 |
| MTTF | 283.3 years @ 40 °C |
| Sensor | |
| Technology | Magnetic |
| Resolution Singleturn | 12 bit |
| Resolution Multiturn | 4 bit |
| Multiturn Technology | Self Powered Magnetic Pulse Counter (No Battery, Wiegand Sensor) |
| Accuracy (INL) | ±0.36° |
| Code | Analog Voltage 0.5 – 9.5 V |
| Cycle Time Base Sensor | 600 µs |
| Minimum Measurement Range | 0 – 22.5° |
| Resolution of Output | Max. 12 bits over entire measuring range (Fractional Turns - Resolution decreases less than 12 bits when measuring range is less than 90 degrees) |
| Multiturn Range | 16 turn (default setting). User can use the scaling functionality to measure up to 32768 turns |
| Environmental Specifications | |
| Protection Class (Shaft) | IP65 |
| Protection Class (Housing) | IP65 |
| Operating Temperature | -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F) |
| Humidity | 98% RH, no condensation |
| Mechanical Data | |
| Housing Material | Steel |
| Housing Coating | Cathodic corrosion protection (>720 hrs salt spray resistance) |
| Flange Type | Synchro, ø 36 mm |
| Flange Material | Aluminum |
| Shaft Type | Solid, Length = 11.5 mm |
| Shaft Diameter | ø 6 mm (0.24") |
| Shaft Material | Stainless Steel V2A (1.4305, 303) |
| Max. Shaft Load | Axial 40 N, Radial 110 N |
Minimum Mechanical Lifetime
(10^8 revolutions with Fa/Fr) | 40 (20 N / 40 N), 14 (40 N / 60 N), 10 (40 N / 80 N), 6 (40 N / 110 N) |
| Friction Torque | ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) |
| Max. Permissible Mechanical Speed | ≤ 12000 1/min |
| Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
| Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) |
| Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) |
| Length | 43 mm (1.69") |
| Weight | 205 g (0.45 lb) |
| Electrical Connection | |
| Connection Orientation | Axial |
| Cable Length | 1 m [39"] |
| Wire Cross Section | 0.14 mm² / AWG 26 |
| Material / Type | PVC |
| Cable Diameter | 6 mm (0.24 in) |
| Minimum Bend Radius | 46 mm (1.81") fixed, 61 mm (2.4") flexing |
| Certification | |
| Approval | CE + cULus + E1 |
| Product Life Cycle | |
| Product Life Cycle | Discontinued |
| Connection Plan | |
| SIGNAL | CABLE COLOR |
| Power Supply | Red |
| GND | Yellow |
| Voltage Output | Green |
| Set1 | Brown |
| Set2 | White |
| Not Connected | Blue |
| Not Connected | Gray |
| Not Connected | Pink |
| Shielding | Shield |
Connector-View on Encoder
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
Watch a simple installation video
